Petroleum Products · Grease Extreme Pressure

GREASE EXTREME-PRESSURE, SHELL ALVANIA EP-2 16KG 450163

Shell Alvania EP(LF) 2 is now sold as Shell Gadus S2 V220 2: lithium EP grease, NLGI 2, 220 cSt base oil, -20 to +130 °C. Ordering the 16 kg can.

What it is

IMPA 450163 is Shell’s lithium extreme-pressure grease in NLGI grade 2, in a 16 kg can, under its old name Alvania EP-2. Shell now sells it as Shell Gadus S2 V220 2. Shell’s data sheet gives the former names as Shell Alvania EP(LF) 2 and Shell Retinax EP 2.[1]

Shell describes it as a multipurpose EP grease for rolling and plain bearings, hinges and sliding surfaces. It is aimed at heavily loaded bearings, including shock loads in wet conditions. On board that means deck machinery, winch and windlass bearings and general grease points.[1]

How to specify and order it

Quote both names on the requisition: "Shell Alvania EP 2 / Gadus S2 V220 2, 16 kg". A supplier who only stocks the new name can then match it. Shell’s typical data sheet values are NLGI 2 with a lithium soap thickener and mineral base oil. Base-oil viscosity is 220 cSt at 40 °C and 19 cSt at 100 °C. Worked penetration is 265–295, dropping point 180 °C and four-ball weld load 315 kg. The recommended operating range is -20 °C to +130 °C.[1]

If another brand is offered, ask for a lithium-soap EP grease of NLGI 2 with similar base-oil viscosity. The IMPA neighbours are Esso Lithtan EP-2 (450168, 16 kg) and Mobil Mobilux EP-2 (450172, 18 kg). The softer Shell grades are EP-1 (450162) and EP-RO (450161). Do not swap grades without checking the lubrication chart.[1]

Rules and approvals

Shell’s data sheet says the grease must not come into contact with the rubber parts of hydraulic brake systems. Used grease must go to an authorised collection point, not into drains, soil or water. Health and safety guidance is in the product safety data sheet, so keep it with the lubricant stores.[1]

Questions buyers ask

What replaced Shell Alvania EP 2?
Shell Gadus S2 V220 2. Shell’s data sheet lists Shell Alvania EP(LF) 2 and Shell Retinax EP 2 as its former names.
What is the temperature range of Shell Gadus S2 V220 2?
Shell recommends it for -20 °C to +130 °C. Its typical dropping point is 180 °C.

Published by Sherif Awad, founder of GeoMarineHub — in ship supply since 1990, a family business since 1981 (45 years). Last checked .

Specification · IMPA 450163

Read off the catalogue name · priced per can

Also in Grease Extreme Pressure

Requests by e-mail · no account needed

E-mail the requisition for IMPA 450163

No account needed. Send the code, the quantity and the port of call — or the whole requisition as it left your desk — and verified suppliers at the port price it, sealed, on the same thread.

supply@geomarinehub.com
  1. 01

    Send

    Excel, PDF or typed into the mail — whatever your system produced.

  2. 02

    Receipt

    Within minutes, naming what we read and anything we could not.

  3. 03

    Offers

    Priced by verified suppliers at the port, back on the same thread.

Most requested sections