IMPA 31 Head Protection

Faceshield Frames and Visors

"Faceshield Frames and Visors" items from the IMPA marine catalogue with IMPA codes and units of measure — order for your vessel from verified suppliers via Geomarine.

Supply these items

No account needed — tell us the port and we’ll source it for your vessel.

Items

12 items

FRAME WITH DEBRIS CONTROL MSA, 10115730 F/SLOTTED CAPS V-GARD

IMPA 310502 PCE

MSA 10115730 debris control frame for V-Gard helmets (slotted and non-slotted), non-metallic construction suitable for electrical work. Angled design sheds material; compatible with earmuffs and respirators. Meets ANSI/ISEA Z87-1:2010, CSA Z94, EN166:2001 389 BT/EN1731-F, AS/NZS 1337.

FRAME W/DEBRIS CONTROL 10115821, MSA FOR ELEVATED TEMP & V-GARD

IMPA 310503 PCE

MSA 10115821 elevated-temperature debris control frame for V-Gard helmets, withstands 350 °F (176.7 °C); non-metallic, fits slotted and non-slotted models. Compatible with earmuffs and respirators. Meets ANSI/ISEA Z87-1:2010, CSA Z94, EN166:2001 389 BT/EN1731-F, AS/NZS 1337.

FRAME W/OUT DEBRIS CONTROL MSA, 10121266 F/SLOTTED CAPS V-GARD

IMPA 310504 PCE

MSA 10121266 frame without debris control for V-Gard helmets (slotted and non-slotted), non-metallic construction. Compatible with earmuffs and respirators. Meets ANSI/ISEA Z87-1:2010, CSA Z94, EN166:2001 389 BT/EN1731-F, AS/NZS 1337.

FRAME W/OUT DEBRIS CONTROL MSA, 10121267 F/SLOTTED CAPS V-GARD

IMPA 310505 PCE

MSA 10121267 frame without debris control for V-Gard helmets (slotted and non-slotted), non-metallic construction. Compatible with earmuffs and respirators. Meets ANSI/ISEA Z87-1:2010, CSA Z94, EN166:2001 389 BT/EN1731-F, AS/NZS 1337.

FRAME UNIVER. W/DEBRIS CONTROL, MSA 10115822 FOR CAPS V-GARD

IMPA 310506 PCE

MSA 10115822 universal debris control frame for V-Gard helmets, non-metallic. Compatible with earmuffs and respirators. Meets ANSI/ISEA Z87-1:2010, CSA Z94, EN166:2001 389 BT/EN1731-F, AS/NZS 1337.

FRAME UNIVERSAL MSA 10121268, W/O DEBRIS CONTROL F/V-GARD

IMPA 310507 PCE

MSA 10121268 universal frame without debris control for V-Gard helmets, non-metallic construction. Compatible with earmuffs and respirators. Meets ANSI/ISEA Z87-1:2010, CSA Z94, EN166:2001 389 BT/EN1731-F, AS/NZS 1337.

FRAME UNIVER. W/DEBRIS CONTROL, ELEVATED TEMP 10116552 F/VGARD

IMPA 310508 PCE

MSA 10116552 universal elevated-temperature debris control frame for V-Gard helmets, withstands 350 °F (176.7 °C); non-metallic. Compatible with earmuffs and respirators. Meets ANSI/ISEA Z87-1:2010, CSA Z94, EN166:2001 389 BT/EN1731-F, AS/NZS 1337.

FRAME UNIV. ELEV TEMP 10124426, W/O DEBRIS CONTROL F/MSA VGARD

IMPA 310509 PCE

MSA 10124426 universal elevated-temperature frame without debris control for V-Gard helmets, withstands 350 °F (176.7 °C); non-metallic. Compatible with earmuffs and respirators. Meets ANSI/ISEA Z87-1:2010, CSA Z94, EN166:2001 389 BT/EN1731-F, AS/NZS 1337.

HEADGEAR FRAME V-GARD 10127061, STANDARD WITHOUT VISOR

IMPA 310510 PCE

MSA V-Gard 10127061 standard headgear frame (without visor) in HDPE, adjustable to head sizes 52–64 cm. Pairs with V-Gard visors via quick-release system; non-metallic for electrical use. Meets ANSI/ISEA Z87-1:2010, CSA Z94, EN166:2001 389 BT/EN1731-F, AS/NZS 1337.

HEADGEAR FRAME V-GARD 10127062, ELEVATED TEMP. WITHOUT VISOR

IMPA 310520 PCE

MSA V-Gard 10127062 elevated-temperature headgear frame (without visor) in heat-resistant nylon, tested to 400 °F (204 °C), fits head sizes 52–64 cm. Non-metallic, pairs with V-Gard visors. Meets ANSI/ISEA Z87-1:2010, CSA Z94, EN166:2001 389 BT/EN1731-F, AS/NZS 1337.

FRAME FOR FULL BRIM HATS, V-GARD MSA 10116627

IMPA 310529 PCE

Attachment frame for MSA V-Gard slotted or non-slotted helmets with angled profile to redirect debris. Non-metallic construction with heavy-duty rubber strap; compatible with earmuffs and half-mask respirators. Meets ANSI/ISEA Z87-1:2010, CSA Z94, EN166:2001, EN1731-F, AS/NZS 1337.

FRAME ELEVATED TEMPERATURE MSA, FULL BRIM HATS V-GARD 10116628

IMPA 310530 PCE

Elevated temperature attachment frame for MSA V-Gard slotted or non-slotted helmets, rated to 350°F (176.7°C). Non-metallic construction with heavy-duty rubber strap; compatible with earmuffs and half-mask respirators. Meets ANSI/ISEA Z87-1:2010, CSA Z94, EN166:2001, EN1731-F, AS/NZS 1337.

Other families in Head Protection

Chin Protectors 2 Communication System integrated in Fire Fighter Helmet 1 Fire Fighter Helmets 2 Helmet Mounted Headset 1 Helmets Vanguard for Lateral Protection 5 Replacement Suspensions 10 Safety Caps Slotted V-Gard GREEN 5 Safety Hats Slotted V-Gard 12 Safety Hats Slotted V-Gard GREEN 5 Safety Helmets Integrated with Spectacle/Visor 18 Safety Helmets Reduced Peak Linesman 24 Safety Helmets Slotted V-Gard 15

Back to 31. Safety Protective Gear →

Faceshield Frames and Visors

Items

Other families in Head Protection

Get a Quote