IMPA 81 Sealing & Bonding Items

Anaerobic Adhesives and Sealants WeiconLock

"Anaerobic Adhesives and Sealants WeiconLock" items from the IMPA marine catalogue with IMPA codes and units of measure — order for your vessel from verified suppliers via Geomarine.

Supply these items

No account needed — tell us the port and we’ll source it for your vessel.

Items

36 items

ADHESIVE THREAD LOCKING HIGHER, VISCOSITY WEICON AN302-43 20ML

IMPA 812912 PCE

Weicon AN302-43 thread-locking adhesive, 20 ml. Anaerobic methacrylate formulation, higher viscosity, medium strength, removable assembly. DVGW2 and KTW1 approved.

ADHESIVE THREAD LOCKING HIGHER, VISCOSITY WEICON AN302-43 50ML

IMPA 812913 PCE

Weicon AN302-43 thread-locking adhesive, 50 ml. Anaerobic methacrylate formulation, higher viscosity, medium strength, removable assembly. DVGW2 and KTW1 approved.

ADHESIVE THREAD LOCKING HIGHER, VISCOSITY AN302-43 200ML

IMPA 812914 PCE

Weicon AN302-43 thread-locking adhesive, 200 ml. Anaerobic methacrylate formulation, higher viscosity, medium strength, removable assembly. DVGW2 and KTW1 approved.

ADHESIVE THREAD LOCKING MEDIUM, VISCOSITY WEICON AN302-70 20ML

IMPA 812915 PCE

Weicon AN302-70 thread-locking adhesive, 20 ml. Anaerobic methacrylate formulation, medium viscosity, high strength, permanent assembly.

ADHESIVE THREAD LOCKING MEDIUM, VISCOSITY WEICON AN302-70 50ML

IMPA 812916 PCE

Weicon AN302-70 thread-locking adhesive, 50 ml. Anaerobic methacrylate formulation, medium viscosity, high strength, permanent assembly.

ADHESIVE THREAD LOCKING MEDIUM, VISCOSITY AN302-70 200ML

IMPA 812917 PCE

Weicon AN302-70 thread-locking adhesive, 200 ml. Anaerobic methacrylate formulation, medium viscosity, high strength, permanent assembly.

ADHESIVE SEALING WEICON, AN 305-42 20ML

IMPA 812918 PCE

Weicon AN305-42 anaerobic sealant, 20 ml. For hydraulic and pneumatic systems. Medium viscosity, medium strength, 0.15 mm maximum gap-fill. DVGW2 certified.

ADHESIVE SEALING WEICON, AN 305-42 50ML

IMPA 812919 PCE

Weicon AN305-42 anaerobic sealant, 50 ml. For hydraulic and pneumatic systems. Medium viscosity, medium strength, 0.15 mm maximum gap-fill. DVGW2 certified.

ADHESIVE SEALING WEICON, AN 305-42 200ML

IMPA 812920 PCE

Weicon AN305-42 anaerobic sealant, 200 ml. For hydraulic and pneumatic systems. Medium viscosity, medium strength, 0.15 mm maximum gap-fill. DVGW2 certified.

ADHESIVE ANAEROBIC THREADLOCK, WEICON AN302-22 20ML

IMPA 815201 PCE

Weicon AN302-22 anaerobic thread-locking adhesive, 20 ml. Medium viscosity, low strength, vibration-resistant, easily disassembled.

ADHESIVE ANAEROBIC THREADLOCK, WEICON AN302-22 50ML

IMPA 815202 PCE

Weicon AN302-22 anaerobic thread-locking adhesive, 50 ml. Medium viscosity, low strength, vibration-resistant, easily disassembled.

ADHESIVE ANAEROBIC THREADLOCK, WEICON AN302-22 200ML

IMPA 815203 PCE

Anaerobic threadlock adhesive, methacrylate resin base, 200 ml pen applicator. Medium viscosity, low strength, vibration-proof, easy disassembly for threaded and cylindrical assemblies.

ADHESIVE ANAEROBIC THREADLOCK, WEICON AN302-60 20ML

IMPA 815204 PCE

Anaerobic threadlock adhesive, methacrylate resin base, 20 ml pen applicator. For passive materials; medium viscosity, high strength, difficult disassembly.

ADHESIVE ANAEROBIC THREADLOCK, WEICON AN302-60 50ML

IMPA 815205 PCE

Anaerobic threadlock adhesive, methacrylate resin base, 50 ml pen applicator. For passive materials; medium viscosity, high strength, difficult disassembly.

ADHESIVE ANAEROBIC THREADLOCK, WEICON AN302-60 200ML

IMPA 815206 PCE

Anaerobic threadlock adhesive, methacrylate resin base, 200 ml pen applicator. For passive materials; medium viscosity, high strength, difficult disassembly.

ADHESIVE ANAEROBIC THREADLOCK, WEICON AN302-90 20ML

IMPA 815207 PCE

Anaerobic threadlock adhesive, methacrylate resin base, 20 ml pen applicator. Extremely low viscosity, high strength, difficult disassembly; seals hair cracks and locks after mounting.

ADHESIVE ANAEROBIC THREADLOCK, WEICON AN302-90 50ML

IMPA 815208 PCE

Anaerobic threadlock adhesive, methacrylate resin base, 50 ml pen applicator. Extremely low viscosity, high strength, difficult disassembly; seals hair cracks and locks after mounting.

ADHESIVE ANAEROBIC THREADLOCK, WEICON AN302-90 200ML

IMPA 815209 PCE

Anaerobic threadlock adhesive, methacrylate resin base, 200 ml pen applicator. Extremely low viscosity, high strength, difficult disassembly; seals hair cracks and locks after mounting.

ADHESIVE ANAEROBIC SEALING, AN 305-72 50ML

IMPA 815210 PCE

Anaerobic pipe and flange sealing compound with PTFE, 50 ml pen applicator, DVGW2 certified. High viscosity, medium strength.

ADHESIVE ANAEROBIC SEALING, AN 305-72 200ML

IMPA 815211 PCE

Anaerobic pipe and flange sealing compound with PTFE, 200 ml pen applicator, DVGW2 certified. High viscosity, medium strength.

ADHESIVE ANAEROBIC GASKEING, AN 305-74 50ML

IMPA 815212 PCE

Anaerobic flange gasketing compound, 50 ml pen applicator. High viscosity, difficult disassembly; for flanges, gearboxes and motor housings.

ADHESIVE ANAEROBIC GASKEING, AN 305-74 200ML

IMPA 815213 PCE

Anaerobic flange gasketing compound, 200 ml pen applicator. High viscosity, difficult disassembly; for flanges, gearboxes and motor housings.

ADHESIVE ANAEROBIC FITTING, AN 305-77 50ML

IMPA 815214 PCE

Anaerobic universal pipe and fitting adhesive, 50 ml pen applicator, DVGW2 certified. High viscosity, medium strength, 0.50 mm maximum gap-filling capacity.

ADHESIVE ANAEROBIC FITTING, AN 305-77 200ML

IMPA 815215 PCE

Anaerobic universal pipe and fitting adhesive, 200 ml pen applicator, DVGW2 certified. High viscosity, medium strength, 0.50 mm maximum gap-filling capacity.

ADHESIVE ANAEROBIC RETAINING, AN 306-01 20ML

IMPA 815216 PCE

Anaerobic retaining compound for cylindrical assemblies, 20 ml pen applicator. Low viscosity, high strength, difficult disassembly.

ADHESIVE ANAEROBIC RETAINING, AN 306-01 50ML

IMPA 815217 PCE

Anaerobic retaining compound for cylindrical assemblies, 50 ml pen applicator. Low viscosity, high strength, difficult disassembly.

ADHESIVE ANAEROBIC RETAINING, AN 306-01 200ML

IMPA 815218 PCE

Anaerobic retaining compound for cylindrical assemblies, 200 ml pen applicator. Low viscosity, high strength, difficult disassembly.

ADHESIVE ANAEROBIC RETAINING, AN 306-30 20ML

IMPA 815219 PCE

Anaerobic retaining compound for passive material cylindrical assemblies, 20 ml pen applicator, BAM3 certified. Higher viscosity, high strength, difficult disassembly.

ADHESIVE ANAEROBIC RETAINING, AN 306-30 50ML

IMPA 815220 PCE

Anaerobic retaining compound for passive material cylindrical assemblies, 50 ml pen applicator, BAM3 certified. Higher viscosity, high strength, difficult disassembly.

ADHESIVE ANAEROBIC RETAINING, AN 306-30 200ML

IMPA 815221 PCE

Anaerobic retaining compound for passive material cylindrical assemblies, 200 ml pen applicator, BAM3 certified. Higher viscosity, high strength, difficult disassembly.

ADHESIVE ANAEROBIC RETAINING, AN 306-38 20ML

IMPA 815222 PCE

Anaerobic retaining compound for high-stress cylindrical assemblies, 20 ml pen applicator. Fast curing, medium viscosity, high strength.

ADHESIVE ANAEROBIC RETAINING, AN 306-38 50ML

IMPA 815223 PCE

Anaerobic methacrylate-based adhesive for threadlocking and retaining cylindrical assemblies under dynamic stress. Medium viscosity, fast curing, high strength. 50 ml pen-system applicator.

ADHESIVE ANAEROBIC RETAINING, AN 306-38 200ML

IMPA 815224 PCE

Anaerobic methacrylate-based adhesive for threadlocking and retaining cylindrical assemblies under dynamic stress. Medium viscosity, fast curing, high strength. 200 ml pen-system applicator.