Resin Based Maintenance Products - Wencon Products

WENCON REPAIR KIT FOR TANKER, VESSELS #8710

Wencon mechanical repair kit #8710 for tankers and vessels. Addresses leaking pipes, tanks, corroded cooler covers, pump casings and valves; sized according to vessel age and tonnage.

WENCON UW COATING WETSURFACE, BROWN #1036 0.5KG

Two-coat epoxy system for wet-surface and underwater application, 0.5 kg brown (#1036). Bonds to metal on wet or submerged surfaces; used for hull coatings, tank and pipe repairs in splash zones and below the waterline.

WENCON PIPE TAPE QUICK CURE, #1044 10X350CM 2UNIT/SET

Wencon pipe repair tape #1044 10×350 cm (2 units per set). Fast-curing bandage for sealing cracks, leaks and corrosion damage in water, oil, steam and gas pipelines; resists pressure, temperature and chemical exposure.

WENCON PUTTY QUICK CURE #1042, 4X125GRM

Wencon Quick Cure #1042 epoxy repair putty, four 125 gram units, mouldable two-part compound for rapid patching and sealing of pipes, flanges and tanks; for use with Wencon Pipe Tape.

WENCON REPAIR KIT #2 COMPLETE, #8704 FOR NEW&LARGE VESSELS

Wencon repair kit #2 (#8704) for new and large vessels. Mechanical repair system for pipes, tanks, cooler covers, pump casings, valves and sea water filters.

WENCON REPAIR KIT #3 COMPLETE, #8708 (FOR MEDIUM&LARGE VSLS)

Wencon repair kit #3 (#8708) for medium and large vessels. Mechanical repair system for pipes, tanks, cooler covers, pump casings, valves and sea water filters.

WENCON REPAIR KIT #4 CMPL #8712, FOR SMALL IN DOMESTIC TRAFFIC

Wencon repair kit #4 (#8712) for small vessels in domestic service. Mechanical repair system for pipes, tanks, cooler covers, pump casings, valves and sea water filters.

WENCON UW CREAM WET SURFACE. #1014 0.5KG

Wencon UW Cream #1014 two-part epoxy, 0.5 kg. Designed for application on wet surfaces and underwater repair of corroded hulls, ship structures, tanks, pipes, flange faces and cavitation damage.

WENCON CREAM #1010 1KG

Wencon Cream #1010 two-part epoxy paste, 1 kg. For repair of corroded metal structures, tanks, pump housings, valves, heat exchanger covers, bearing seats and shaft alignment. Slow-curing formulation suitable for vertical surfaces.

WENCON UW COATING WETSURFACE, ORANGE #1035 0.5KG

Two-coat epoxy system for wet-surface and underwater application, 0.5 kg orange (#1035). Bonds to metal on wet or submerged surfaces; used for hull coatings, tank and pipe repairs in splash zones and below the waterline.

WENCON COATING WHITE #1020, 0.5KG

Two-coat protective coating, 0.5 kg white (#1020), applied by spatula. Resists bimetal corrosion, erosion and impingement on pumps, valves, tanks, wet liners and coolers.

WENCON COATING BLUE #1030, 0.5KG

Two-coat protective coating, 0.5 kg blue (#1030), applied by spatula. Resists bimetal corrosion, erosion and impingement on pumps, valves, tanks, wet liners and coolers.

WENCON GLASS REINFORCE TAPE, #1120 W:50MMXL:10MTR

WENCON EXHAUST REPAIR KIT, HIGH TEMP #1070 2X250GRM

Single-component cold-weld compound for exhaust system cracks and leaks, rated to 1300 °C. Kit includes 2 × 250 g compound, metal mesh reinforcement, spatula and application sheet (#1070).

WENCON REPAIR KIT #1 COMPLETE, #8700 (FOR OLD&LARGE VESSEL)

Wencon repair kit #1 (#8700) for old and large vessels. Mechanical repair system for pipes, tanks, cooler covers, pump casings, valves and sea water filters.

WENCON PUTTY QUICK CURE #1040, 8X125GRM

Wencon Quick Cure #1040 epoxy repair putty, eight 125 gram units, mouldable two-part compound for rapid patching and sealing of pipes, flanges and tanks; for use with Wencon Pipe Tape.

WENCON RAPID QUICK CURE #1005, 8X125GRM

Wencon Rapid Quick Cure #1005 epoxy repair compound; 8 × 125 g tubes. Fast-curing paste for restoration of corroded metal components including tanks, pump housings, valve bodies, heat exchangers, and bearing seats; applies to vertical surfaces.

WENCON PIPE TAPE QUICK CURE, #1045 5X150CM 5UNIT/SET

Wencon pipe repair tape #1045 5×150 cm (5 units per set). Fast-curing bandage for sealing cracks, leaks and corrosion damage in water, oil, steam and gas pipelines; resists pressure, temperature and chemical exposure.

WENCON HI-TEMP COATING YELLOW, #1050 0.5KG

Two-coat high-temperature coating system, 0.5 kg yellow (#1050), rated to 160 °C. Protects inert gas system linings, freshwater generators, hot pipes, heating coils and equipment in aggressive chemical environments.

WENCON HI-TEMP COATING GREEN, #1060 0.5KG

Two-coat high-temperature coating system, 0.5 kg green (#1060), rated to 160 °C. Protects inert gas system linings, freshwater generators, hot pipes, heating coils and equipment in aggressive chemical environments.

WENCON RAPID QUICK CURE #1000, 1KG

Wencon Rapid Quick Cure #1000 epoxy repair compound; 1 kg. Fast-curing paste for restoration of corroded metal components including tanks, pump housings, valve bodies, heat exchangers, and bearing seats; applies to vertical surfaces.

WENCON PIPE TAPE QUICK CURE, #1046 5X350CM 4UNIT/SET

Wencon pipe repair tape #1046 5×350 cm (4 units per set). Fast-curing bandage for sealing cracks, leaks and corrosion damage in water, oil, steam and gas pipelines; resists pressure, temperature and chemical exposure.

WENCON DEGREASING AGENT, CLEANER #1100 0.75LTR

Trichloroethylene-based non-flammable degreaser (Wencon #1100), 0.75 litre. Pre-application cleaner for all Wencon products.

WENCON RELEASE AGENT #1110, 50GRM

Release agent for Wencon applications. 50 g can. Apply thin layer, allow 10 minutes drying, remove excess with cloth.

WENCON UW PUTTY #1012 1 KG

Wencon UW Putty #1012, 1 kg two-component compound engineered for wet-surface and underwater application to fill holes, dents and rebuild corroded surfaces.

CREAM CERAMIC WENCON NO.1016, 0.5KG

Two-part epoxy putty in 0.5 kg set for restoring worn metal components subject to excessive wear, corrosion and erosion. Machinable after cure, applicable to tanks, pumps, valves, pipes, flanges, shafts and heat exchangers.

CERAMIC COATING WENCON LIGHT, GREY NO.1017 0.5KG

Two-component ceramic protective coating, light grey (No. 1017), 0.5 kg. Liquid formulation applied by brush, roller or spatula. For wear and corrosion protection on pumps, valves, tanks, wet liners and cooler components.

CERAMIC COATING WENCON LIGHT, GREEN NO.1018 0.5KG

Two-component ceramic protective coating, light green (No. 1018), 0.5 kg. Liquid formulation applied by brush, roller or spatula. For wear and corrosion protection on pumps, valves, tanks, wet liners and cooler components.

APPLICATION TOOL WENCON, NO.2805

Wencon application tool kit containing 4 spatulas, 4 brushes, 4 mixing knives for two-component products, scissors for tape, and 4 pairs nitrile gloves.

FIXATION TOOL WENCON, NO.2808

Fixation tool no. 2808 for securing Wencon repair products to damaged tank areas, welding seams, corrosion sites and pitting.

CLEANER & DEGREASER WENCON BIO, PRIOR APPLICATION 1104 0.75LTR

Wencon Bio water-based alkaline degreaser, 0.75 L. Pre-application surface cleaner for Wencon products; non-hazardous and environmentally friendly. Supplied with foam-spray head for use on wet or dry surfaces.