Weicon Plastic Metals

WEICON PALSTIC METAL A 500GRM

IMPA 812901 SET

Two-component epoxy resin repair compound, 500 g. Temperature range –35°C to +120°C. Machinable after cure; suitable for shaft rebuilding, pipe and tank leaks, and erosion/corrosion damage to pumps and valves.

WEICON PALSTIC METAL A 2KG

IMPA 812902 SET

Two-component epoxy resin repair compound, 2 kg. Temperature range –35°C to +120°C. Machinable after cure; suitable for shaft rebuilding, pipe and tank leaks, and erosion/corrosion damage to pumps and valves.

ALUMINIUM FILLED LIQUID, WEICON C 0.5KG

IMPA 812903 SET

Two-component aluminium-filled epoxy liquid, 0.5 kg. Temperature range –35°C to +120°C. Machinable after cure; for repairs to shafts, pipes, tanks, pumps and valves.

ALUMINIUM FILLED LIQUID, WEICON C 2.0KG

IMPA 812904 SET

Two-component aluminium-filled epoxy liquid, 2.0 kg. Temperature range –35°C to +120°C. Machinable after cure; for repairs to shafts, pipes, tanks, pumps and valves.

WEICON METAL B 500GRM

IMPA 812905 SET

Two-component epoxy resin repair compound, 500 g. Temperature range –35°C to +120°C. Machinable after cure; suitable for shaft rebuilding, pipe and tank leaks, and erosion/corrosion damage to pumps and valves.

WEICON METAL B 2KG

IMPA 812906 SET

Two-component epoxy resin system for repairs of shafts, pipes, tanks, pumps and valves affected by erosion or corrosion. Operates from –35°C to +120°C and is machinable after curing. 2 kg.

WEICON PLASTIC METAL BR 500GRM

IMPA 812910 SET

Two-component epoxy plastic metal formulation for structural repairs and restoration of damaged equipment. Temperature range –35°C to +120°C. Machinable when fully cured. 500 g.

WEICON PLASTIC METAL BR 2KG

IMPA 812911 SET

Two-component epoxy plastic metal formulation for structural repairs and restoration of damaged equipment. Temperature range –35°C to +120°C. Machinable when fully cured. 2 kg.

WEICON PLASTIC METAL F 500GRM

IMPA 812921 SET

Two-component epoxy plastic metal repair compound suitable for shaft rebuilding and equipment restoration. Operating temperature –35°C to +120°C. Machinable after cure. 500 g.

WEICON PLASTIC METAL F 2KG

IMPA 812922 SET

Two-component epoxy plastic metal repair compound suitable for shaft rebuilding and equipment restoration. Operating temperature –35°C to +120°C. Machinable after cure. 2 kg.

WEICON PLASTIC METAL SF 500GRM

IMPA 812931 SET

Two-component epoxy repair system for restoration of corroded or eroded marine equipment and pipework. Temperature stable from –35°C to +120°C. Can be machined once set. 500 g.

WEICON PLASTIC METAL SF 2KG

IMPA 812932 SET

Two-component epoxy repair system for restoration of corroded or eroded marine equipment and pipework. Temperature stable from –35°C to +120°C. Can be machined once set. 2 kg.

ALUMINIUM FILLED VISCOUS, WEICON F2 0.5KG

IMPA 812933 SET

Aluminium-filled two-component epoxy system for rapid repairs to shafts, tanks and valves. Operating range –35°C to +120°C with post-cure machinability. 0.5 kg.

ALUMINIUM FILLED VISCOUS, WEICON F2 2.0KG

IMPA 812934 SET

Aluminium-filled two-component epoxy system for rapid repairs to shafts, tanks and valves. Operating range –35°C to +120°C with post-cure machinability. 2.0 kg.

WEICON PLASTIC METAL UW 500GRM

IMPA 812935 SET

Two-component epoxy plastic metal formulation for underwater and submerged equipment repair applications. Temperature range –35°C to +120°C. Machinable after curing. 500 g.

WEICON PLASTIC METAL UW 2KG

IMPA 812936 SET

Two-component epoxy plastic metal formulation for underwater and submerged equipment repair applications. Temperature range –35°C to +120°C. Machinable after curing. 2 kg.

MINERAL FILLED BRUSHABLE, LIQUID WEICON CERAMIC BL 0.5KG

IMPA 812937 SET

Mineral-filled, brush-applicable two-component epoxy liquid for erosion and corrosion repairs. Operational from –35°C to +120°C. Machinable once cured. 0.5 kg.

MINERAL FILLED BRUSHABLE, LIQUID WEICON CERAMIC BL 2.0KG

IMPA 812938 SET

Mineral-filled, brush-applicable two-component epoxy liquid for erosion and corrosion repairs. Operational from –35°C to +120°C. Machinable once cured. 2.0 kg.

MINEAL FILLED PUTTY WEICON, CERAMIC W 0.5KG

IMPA 812941 SET

Mineral-filled putty-form two-component epoxy for hand-applied repairs to pipes, pumps and structural components. Temperature stable –35°C to +120°C. Machinable after setting. 0.5 kg.

MINEAL FILLED PUTTY WEICON, CERAMIC W 2.0KG

IMPA 812942 SET

Mineral-filled putty-form two-component epoxy for hand-applied repairs to pipes, pumps and structural components. Temperature stable –35°C to +120°C. Machinable after setting. 2.0 kg.

METALLIC FILLED PUTTY WEICON ST, 0.5KG

IMPA 812943 SET

Metallic-filled epoxy putty for restoration and rebuilding of worn or damaged shafts and equipment surfaces. Temperature range –35°C to +120°C. Post-cure machinable. 0.5 kg.

METALLIC FILLED PUTTY WEICON ST, 2.0KG

IMPA 812944 SET

Metallic-filled epoxy putty for restoration and rebuilding of worn or damaged shafts and equipment surfaces. Temperature range –35°C to +120°C. Post-cure machinable. 2.0 kg.

TITANIUM FILLED PUTTY WEICON, TI 0.5KG

IMPA 812945 SET

Titanium-filled two-component epoxy putty for high-strength repairs of marine equipment and pipework. Operating temperature –35°C to +120°C. Machinable when cured. 0.5 kg.

TITANIUM FILLED PUTTY WEICON, TI 2.0KG

IMPA 812946 SET

Titanium-filled two-component epoxy putty for high-strength repairs of marine equipment and pipework. Operating temperature –35°C to +120°C. Machinable when cured. 2.0 kg.

STEEL FILLED LIQUID WEICON WR, WEAR RESISTANT 0.5KG

IMPA 812947 SET

Steel-filled liquid two-component epoxy system with wear-resistant properties for repair of high-wear surfaces and equipment. Temperature range –35°C to +120°C. Machinable post-cure. 0.5 kg.

STEEL FILLED LIQUID WEICON WR, WEAR RESISTANT 2.0KG

IMPA 812948 SET

Two-component steel-filled epoxy resin, 2.0 kg. Suitable for shaft rebuilding, pipe and tank repairs, and erosion/corrosion damage to pumps and valves. Operating range –35°C to +120°C; machinable after cure.

MINERAL FILLED PUTTY WEICON, WR2 WEAR RESISTANT 0.5KG

IMPA 812949 SET

Two-component mineral-filled epoxy putty, 0.5 kg. For shaft rebuilding, pipe and tank sealing, and pump/valve repairs affected by wear or corrosion. Temperature range –35°C to +120°C; workable with standard tools after hardening.

MINERAL FILLED PUTTY WEICON, WR2 WEAR RESISTANT 2.0KG

IMPA 812950 SET

Two-component mineral-filled epoxy putty, 2.0 kg. Suitable for shaft rebuilding, pipe and tank sealing, and pump/valve restoration. Operating range –35°C to +120°C; machinable after curing.

WEICON PLASTIC METAL HB 300, 1KG

IMPA 812951 SET

Two-component plastic metal epoxy compound (Weicon HB 300), 1 kg. For repairs to shafts, pipes, tanks, pumps and valves damaged by erosion or corrosion. Temperature resistant –35°C to +120°C; machinable when set.

MINERAL FILLED PUTTY KNEADABLE, EPOXY RESIN PUTTY 0.1KG

IMPA 812952 SET

Kneadable two-component mineral-filled epoxy putty, 0.1 kg. Suitable for shaft and equipment repairs, pipe sealing, and corrosion/erosion damage. Temperature range –35°C to +120°C; machinable after cure.

MINERAL FILLED PUTTY KNEADABLE, EPOXY RESIN PUTTY 0.4KG

IMPA 812953 SET

Kneadable two-component mineral-filled epoxy putty, 0.4 kg. For shaft rebuilding, leak sealing, and pump/valve restoration. Operating range –35°C to +120°C; can be machined post-cure.

MINERAL FILLED PUTTY KNEADABLE, EPOXY RESIN PUTTY 0.8KG

IMPA 812954 SET

Kneadable two-component mineral-filled epoxy putty, 0.8 kg. Repairs shafts, pipes, tanks, and corroded equipment. Temperature resistant –35°C to +120°C; machinable after hardening.

CHOCKING BACKING COMPOUND, WEICON CBC 3.0 KG

IMPA 812955 SET

Two-component epoxy chocking compound (Weicon CBC), 3.0 kg. For machinery shimming and foundation levelling with minimal shrinkage. Offers good compressive strength and resistance to oils, fuels, chemicals and temperature variation.

CHOCKING BACKING COMPOUND, WEICON CBC 10.0 KG

IMPA 812956 SET

Two-component epoxy chocking compound (Weicon CBC), 10.0 kg. For precision machinery alignment and foundation backing with low shrinkage. Provides compressive strength and protection against oils, fuels and chemicals.

MINERAL FILLED PUTTY EXTREMELY, WEAR RESISTANT WEICON WP 2.0KG

IMPA 812957 SET

Two-component extreme wear-resistant mineral-filled epoxy putty (Weicon WP), 2.0 kg. For shaft rebuilding and severe erosion/corrosion damage to pipes, tanks and equipment. Range –35°C to +120°C; machinable after cure.

MINERAL FILLED PUTTY EXTREMELY, WEAR RESISTANT WEICON WP 10KG

IMPA 812958 SET

Two-component extreme wear-resistant mineral-filled epoxy putty (Weicon WP), 10 kg. Restores shafts, seals pipes and tanks, repairs pump and valve damage from erosion or corrosion. Temperature range –35°C to +120°C; machinable when set.

MOULD RELEASE AGENT LIQUID, WEICON F1000 250ML

IMPA 812959 SET

Liquid mould release agent (Weicon F1000), 250 ml. Applied to moulds and patterns to facilitate component separation during epoxy resin casting operations.

MOULD RELEASE AGENT LIQUID, WEICON F1000 1LTR

IMPA 812960 SET

Liquid mould release agent (Weicon F1000), 1 litre. Applied to moulds and patterns to facilitate component separation during epoxy resin casting operations.

MOULD RELEASE AGENT WAX, WEICON P500 150GRM

IMPA 812964 SET

Wax-based mould release agent (Weicon P500), 150 g. Used on moulds and patterns to enable easy removal of cured epoxy components.

MOULD RELEASE AGENT WAX, WEICON P500 0.5KG

IMPA 812979 SET

Wax-based mould release agent (Weicon P500), 0.5 kg. Applied to moulds and patterns to facilitate separation of epoxy resin castings.

Items

Other families in Resin Based Maintenance Products - Weicon Products

Get a Quote