Cables
Armoured Cables
Armoured Cables is a group of 59 IMPA-coded items (codes 794275–794350) under Cables in the Electrical Equipment section (IMPA 79). All of them are priced per metre. The names most often specify PVC (19 of 59) and rubber (19 of 59).
Buying guide
This group is the ship’s fixed-installation cable sold by the metre: rubber-insulated cable with wire armour and a PVC cover, and halogen-free 0.6/1 kV power cable in armoured (LKSM-HF) and unarmoured (LKM-HF) versions, from 1 mm² multi-core control cable up to 16 mm² power cores. The armour gives mechanical protection and, where required, screening.
The electrical officer raises it for repairs, for re-routing after damage, or for new consumers fitted on board; larger runs are usually ordered by the superintendent with a drawing.
How to specify it
Give the number of cores, the conductor cross-section in mm², the rated voltage (for example 0.6/1 kV), whether armour is needed, the sheath type (halogen-free or PVC) and the length in metres. IEC 60092-353 covers shipboard power cables rated 0.6/1 (1.2) kV and 1.8/3 (3.6) kV for fixed installations, so asking for cable "to IEC 60092-353" fixes the construction and testing for that class.[2]
Match the existing cable type designation where you are extending a run, and ask for the maker’s type approval certificate if the ship’s class requires approved cable. The current-carrying figures printed in the IMPA descriptions are indicative; the installed rating depends on grouping and ambient temperature.
Rules and certificates
IEC 60092-350 sets the general construction and test methods for power, control and instrumentation cables with copper conductors for fixed systems on ships and offshore units up to 18/30(36) kV, including fixed runs subject to vibration or ship motion. It does not cover cables meant for frequent flexing, nor optical-fibre, data/communication or coaxial cables — those are bought to other standards.[1]
IEC 60092-353 applies to shipboard and offshore power cables with extruded solid insulation rated 0.6/1 (1.2) kV or 1.8/3 (3.6) kV, intended for fixed installation, and refers to IEC 60092-350 for general construction.[2]
Questions buyers ask
- Can I use armoured marine cable for a portable tool lead?
- No. IEC 60092-350 cables are for fixed installation and exclude cables intended for frequent flexing; use flexible cabtyre cable for portable leads.
- What does 0.6/1 kV mean?
- It is the cable’s rated voltage class. IEC 60092-353 covers shipboard power cables in two classes, 0.6/1 (1.2) kV and 1.8/3 (3.6) kV; the ordinary low-voltage power cable in this group is 0.6/1 kV.
Sources
Published by Sherif Awad, founder of GeoMarineHub — in ship supply since 1990, a family business since 1981 (45 years). Last checked .
At a glance
Part of Electrical Equipment (IMPA section 79): Lamps, cable, switches, fuses, batteries, connectors, marine lighting fittings and meters.
It is one of 15 groups under Cables; the others include Antenna Copper Wire, Cables Silicon Rubber/Glass Cloth Sheathed, Cabtyre Cables PVC, Cabtyre Cables Rubber, Coaxial Cables Radio Frequency and 9 more.
Post the ones you need as a requirement and verified suppliers activated at your port bid on them — sealed, so nobody sees another bid.
- Items
- 59
- IMPA codes
- 794275–794350
- Priced
- per metre
- Materials
- PVC · rubber
Items
Also under Cables
Most requested sections
