IMPA 63 63. Cutting Tools

Reamers

Browse the product families and items within the "Reamers" sub-group of the IMPA marine catalogue, and order them from verified suppliers via Geomarine.

Families

198

Items

Product families

Reamer Sets Adjustable 8 Reamers Hand 116 Taper Pin Reamers Hand 1/48 18 Taper Pin Reamers Hand 1/50 40 Taper Reamers Morse 16

Items in this sub-group

198 items

REAMER HAND STRAIGHT FLUTE, 0.5X30MM

IMPA 630601 PCE

Hand-operated reamer, 0.5×30 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 0.8X35MM

IMPA 630602 PCE

Hand-operated reamer, 0.8×35 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 1.0X40MM

IMPA 630603 PCE

Hand-operated reamer, 1.0×40 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 1.2X45MM

IMPA 630604 PCE

Hand-operated reamer, 1.2×45 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 1.5X50MM

IMPA 630605 PCE

Hand-operated reamer, 1.5×50 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 1.8X55MM

IMPA 630606 PCE

Hand-operated reamer, 1.8×55 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 2.0X60MM

IMPA 630607 PCE

Hand-operated reamer, 2.0×60 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 2.2X60MM

IMPA 630608 PCE

Hand-operated reamer, 2.2×60 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 2.5X65MM

IMPA 630609 PCE

Hand-operated reamer, 2.5×65 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 2.8X65MM

IMPA 630610 PCE

Hand-operated reamer, 2.8×65 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 3.0X72MM

IMPA 630611 PCE

Hand-operated reamer, 3.0×72 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 3.5X75MM

IMPA 630612 PCE

Hand-operated reamer, 3.5×75 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 4.0X80MM

IMPA 630613 PCE

Hand-operated reamer, 4.0×80 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 4.5X85MM

IMPA 630614 PCE

Hand-operated reamer, 4.5×85 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 5.0X90MM

IMPA 630615 PCE

Hand-operated reamer, 5.0×90 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 5.5X95MM

IMPA 630616 PCE

Hand-operated reamer, 5.5×95 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 6.0X100MM

IMPA 630617 PCE

Hand-operated reamer, 6.0×100 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 6.5X100MM

IMPA 630618 PCE

Hand-operated reamer, 6.5×100 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 7.0X105MM

IMPA 630619 PCE

Hand-operated reamer, 7.0×105 mm, with straight flutes and chamfered cutting edge for hole finishing.

REAMER HAND STRAIGHT FLUTE, 7.5X110MM

IMPA 630620 PCE

Hand-operated reamer with straight flutes, 7.5×110 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 8.0X115MM

IMPA 630621 PCE

Hand-operated reamer with straight flutes, 8.0×115 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 8.5X120MM

IMPA 630622 PCE

Hand-operated reamer with straight flutes, 8.5×120 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 9.0X125MM

IMPA 630623 PCE

Hand-operated reamer with straight flutes, 9.0×125 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 9.5X125MM

IMPA 630624 PCE

Hand-operated reamer with straight flutes, 9.5×125 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 10.0X130MM

IMPA 630625 PCE

Hand-operated reamer with straight flutes, 10.0×130 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 10.5X135MM

IMPA 630626 PCE

Hand-operated reamer with straight flutes, 10.5×135 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 11.0X140MM

IMPA 630627 PCE

Hand-operated reamer with straight flutes, 11.0×140 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 11.5X145MM

IMPA 630628 PCE

Hand-operated reamer with straight flutes, 11.5×145 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 12.0X150MM

IMPA 630629 PCE

Hand-operated reamer with straight flutes, 12.0×150 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 12.5X155MM

IMPA 630630 PCE

Hand-operated reamer with straight flutes, 12.5×155 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 13.0X160MM

IMPA 630631 PCE

Hand-operated reamer with straight flutes, 13.0×160 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 13.5X165MM

IMPA 630632 PCE

Hand-operated reamer with straight flutes, 13.5×165 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 14.0X165MM

IMPA 630633 PCE

Hand-operated reamer with straight flutes, 14.0×165 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 14.5X170MM

IMPA 630634 PCE

Hand-operated reamer with straight flutes, 14.5×170 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 15X175MM

IMPA 630635 PCE

Hand-operated reamer with straight flutes, 15×175 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 16X185MM

IMPA 630636 PCE

Hand-operated reamer with straight flutes, 16×185 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 17X190MM

IMPA 630637 PCE

Hand-operated reamer with straight flutes, 17×190 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 18X200MM

IMPA 630638 PCE

Hand-operated reamer with straight flutes, 18×200 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 19X210MM

IMPA 630639 PCE

Hand-operated reamer with straight flutes, 19×210 mm, for finishing bored hole surfaces. Chamfered cutting edge aids initial engagement; spiral flutes available for interrupted cuts such as keyways.

REAMER HAND STRAIGHT FLUTE, 20X220MM

IMPA 630640 PCE

Hand-operated reamer with straight flutes, 20×220 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

Back to 63. Cutting Tools →

Order Reamers for your vessel

Join our global network as a supplier or start ordering maritime services today

No account needed — tell us the port and we’ll source it for your vessel.