GeoMarineHub — loading…
Drills
Center Drills for Center Holes
Center Drills for Center Holes is a group of 84 IMPA-coded items (codes 630501–630598) under Drills in the Cutting Tools section (IMPA 63). All of them are priced per piece. The list runs through 9 metric sizes from 1 mm to 12.5 mm.
At a glance
Part of Cutting Tools (IMPA section 63): Drill bits, taps and dies, saw blades, cutting and grinding discs, reamers and hole saws.
It is one of 9 groups under Drills; the others include Cobalt Drills Straight Shank Twist, Drill Sets Straight Shank Twist, Drill Stands, Drills Straight Shank Twist, Drills Twist Morse Taper Shank and 3 more.
Post the ones you need as a requirement and verified suppliers activated at your port bid on them — sealed, so nobody sees another bid.
- Items
- 84
- IMPA codes
- 630501–630598
- Priced
- per piece
- Sizes
- 1 mm – 12.5 mm
Items
| IMPA | Item | Unit |
|---|---|---|
| 630501 | DRILL CENTER A-TYPE, 1.0MM DRILL DIAM 60DEG | PCS |
| 630502 | DRILL CENTER A-TYPE, 1.6MM DRILL DIAM 60DEG | PCS |
| 630503 | DRILL CENTER A-TYPE, 2.0MM DRILL DIAM 60DEG | PCS |
| 630504 | DRILL CENTER A-TYPE, 2.5MM DRILL DIAM 60DEG | PCS |
| 630505 | DRILL CENTER A-TYPE, 3.15MM DRILL DIAM 60DEG | PCS |
| 630506 | DRILL CENTER A-TYPE, 4.0MM DRILL DIAM 60DEG | PCS |
| 630507 |
Also under Drills
Most requested sections