Your Digital Maritime Supply Platform

IMPA 61 61. Hand Tools

Punches / Stencils

Browse the product families and items within the "Punches / Stencils" sub-group of the IMPA marine catalogue, and order them from verified suppliers via Geomarine.

11
Families
196
Items

Product families

Center Punch Sets 2 Center Punches 3 Chisel & Punch Sets 2 Combination Chisel Sets 1 Heavy Duty Wad Punches 52 Letter or Figure Sets 22 Pin Punch Sets 1 Punches Pin Rivet 8 Punches Round Hole 48 Punching tool sets 17 Stencil Letter and Figure Sets 40

Items in this sub-group

196 items
PUNCHING TOOL SET DIE & TABLE, 40MM

PUNCHING TOOL SET DIE & TABLE, 40MM

IMPA 612981 SET

Punch die and table set for creating holes in soft metals (brass, copper), leather, canvas, and gasket material. 40 mm capacity; bespoke sizes 40–55 mm available to order.

PUNCHING TOOL SET DIE & TABLE, 41MM

PUNCHING TOOL SET DIE & TABLE, 41MM

IMPA 612982 SET

Punch die and table set for creating holes in soft metals (brass, copper), leather, canvas, and gasket material. 41 mm capacity; bespoke sizes 40–55 mm available to order.

PUNCHING TOOL SET DIE & TABLE, 42MM

PUNCHING TOOL SET DIE & TABLE, 42MM

IMPA 612983 SET

Hole punching tool set with die and table for soft metals (brass, copper) and materials such as leather, canvas, and gasket sheet. Standard range 6–38 mm; sizes 40–55 mm available by special order.

PUNCHING TOOL SET DIE & TABLE, 43MM

PUNCHING TOOL SET DIE & TABLE, 43MM

IMPA 612984 SET

Hole punching tool set with die and table for soft metals (brass, copper) and materials such as leather, canvas, and gasket sheet. Standard range 6–38 mm; sizes 40–55 mm available by special order.

PUNCHING TOOL SET DIE & TABLE, 44MM

PUNCHING TOOL SET DIE & TABLE, 44MM

IMPA 612985 SET

Hole punching tool set with die and table for soft metals (brass, copper) and materials such as leather, canvas, and gasket sheet. Standard range 6–38 mm; sizes 40–55 mm available by special order.

PUNCHING TOOL SET DIE & TABLE, 45MM

PUNCHING TOOL SET DIE & TABLE, 45MM

IMPA 612986 SET

Hole punching tool set with die and table for soft metals (brass, copper) and materials such as leather, canvas, and gasket sheet. Standard range 6–38 mm; sizes 40–55 mm available by special order.

PUNCHING TOOL SET DIE & TABLE, 46MM

PUNCHING TOOL SET DIE & TABLE, 46MM

IMPA 612987 SET

Hole punching tool set with die and table for soft metals (brass, copper) and materials such as leather, canvas, and gasket sheet. Standard range 6–38 mm; sizes 40–55 mm available by special order.

PUNCHING TOOL SET DIE & TABLE, 47MM

PUNCHING TOOL SET DIE & TABLE, 47MM

IMPA 612988 SET

Hole punching tool set with die and table for soft metals (brass, copper) and materials such as leather, canvas, and gasket sheet. Standard range 6–38 mm; sizes 40–55 mm available by special order.

PUNCHING TOOL SET DIE & TABLE, 48MM

PUNCHING TOOL SET DIE & TABLE, 48MM

IMPA 612989 SET

Hole punching tool set with die and table for soft metals (brass, copper) and materials such as leather, canvas, and gasket sheet. Standard range 6–38 mm; sizes 40–55 mm available by special order.

PUNCHING TOOL SET DIE & TABLE, 49MM

PUNCHING TOOL SET DIE & TABLE, 49MM

IMPA 612990 SET

Hole punching tool set with die and table for soft metals (brass, copper) and materials such as leather, canvas, and gasket sheet. Standard range 6–38 mm; sizes 40–55 mm available by special order.

PUNCHING TOOL SET DIE & TABLE, 50MM

PUNCHING TOOL SET DIE & TABLE, 50MM

IMPA 612991 SET

Hole punching tool set with die and table for soft metals (brass, copper) and materials such as leather, canvas, and gasket sheet. Standard range 6–38 mm; sizes 40–55 mm available by special order.

PUNCHING TOOL SET DIE & TABLE, 51MM

PUNCHING TOOL SET DIE & TABLE, 51MM

IMPA 612992 SET

Hole punching tool set with die and table for soft metals (brass, copper) and materials such as leather, canvas, and gasket sheet. Standard range 6–38 mm; sizes 40–55 mm available by special order.

PUNCHING TOOL SET DIE & TABLE, 52MM

PUNCHING TOOL SET DIE & TABLE, 52MM

IMPA 612993 SET

Hole punching tool set with die and table for soft metals (brass, copper) and materials such as leather, canvas, and gasket sheet. Standard range 6–38 mm; sizes 40–55 mm available by special order.

PUNCHING TOOL SET DIE & TABLE, 53MM

PUNCHING TOOL SET DIE & TABLE, 53MM

IMPA 612994 SET

Hole punching tool set with die and table for soft metals (brass, copper) and materials such as leather, canvas, and gasket sheet. Standard range 6–38 mm; sizes 40–55 mm available by special order.

PUNCHING TOOL SET DIE & TABLE, 54MM

PUNCHING TOOL SET DIE & TABLE, 54MM

IMPA 612995 SET

Hole punching tool set with die and table for soft metals (brass, copper) and materials such as leather, canvas, and gasket sheet. Standard range 6–38 mm; sizes 40–55 mm available by special order.

PUNCHING TOOL SET DIE & TABLE, 55MM

PUNCHING TOOL SET DIE & TABLE, 55MM

IMPA 612996 SET

Hole punching tool set with die and table for soft metals (brass, copper) and materials such as leather, canvas, and gasket sheet. Standard range 6–38 mm; sizes 40–55 mm available by special order.

PUNCH HOLE ROUND 3MM

PUNCH HOLE ROUND 3MM

IMPA 613001 PCE

Tool steel punch, round hole type, 3 mm, polished finish.

PUNCH HOLE ROUND 4MM

PUNCH HOLE ROUND 4MM

IMPA 613002 PCE

Tool steel punch, round hole type, 4 mm, polished finish.

PUNCH HOLE ROUND 5MM

PUNCH HOLE ROUND 5MM

IMPA 613003 PCE

Tool steel punch, round hole type, 5 mm, polished finish.

PUNCH HOLE ROUND 6MM

PUNCH HOLE ROUND 6MM

IMPA 613004 PCE

Tool steel punch, round hole type, 6 mm, polished finish.

PUNCH HOLE ROUND 7MM

PUNCH HOLE ROUND 7MM

IMPA 613005 PCE

Tool steel punch, round hole type, 7 mm, polished finish.

PUNCH HOLE ROUND 8MM

PUNCH HOLE ROUND 8MM

IMPA 613006 PCE

Tool steel punch, round hole type, 8 mm, polished finish.

PUNCH HOLE ROUND 9MM

PUNCH HOLE ROUND 9MM

IMPA 613007 PCE

Tool steel punch, round hole type, 9 mm, polished finish.

PUNCH HOLE ROUND 10MM

PUNCH HOLE ROUND 10MM

IMPA 613008 PCE

Tool steel punch, round hole type, 10 mm, polished finish.

PUNCH HOLE ROUND 11MM

PUNCH HOLE ROUND 11MM

IMPA 613009 PCE

Tool steel punch, round hole type, 11 mm, polished finish.

PUNCH HOLE ROUND 12MM

PUNCH HOLE ROUND 12MM

IMPA 613010 PCE

Tool steel punch, round hole type, 12 mm, polished finish.

PUNCH HOLE ROUND 13MM

PUNCH HOLE ROUND 13MM

IMPA 613011 PCE

Tool steel round punch, 13mm diameter, forged and polished.

PUNCH HOLE ROUND 14MM

PUNCH HOLE ROUND 14MM

IMPA 613012 PCE

Tool steel round punch, 14mm diameter, forged and polished.

PUNCH HOLE ROUND 15MM

PUNCH HOLE ROUND 15MM

IMPA 613013 PCE

Tool steel round punch, 15mm diameter, forged and polished.

PUNCH HOLE ROUND 16MM

PUNCH HOLE ROUND 16MM

IMPA 613014 PCE

Tool steel round punch, 16mm diameter, forged and polished.

PUNCH HOLE ROUND 17MM

PUNCH HOLE ROUND 17MM

IMPA 613015 PCE

Tool steel round punch, 17mm diameter, forged and polished.

PUNCH HOLE ROUND 18MM

PUNCH HOLE ROUND 18MM

IMPA 613016 PCE

Tool steel round punch, 18mm diameter, forged and polished.

PUNCH HOLE ROUND 19MM

PUNCH HOLE ROUND 19MM

IMPA 613017 PCE

Tool steel round punch, 19mm diameter, forged and polished.

PUNCH HOLE ROUND 20MM

PUNCH HOLE ROUND 20MM

IMPA 613018 PCE

Tool steel round punch, 20mm diameter, forged and polished.

PUNCH HOLE ROUND 21MM

PUNCH HOLE ROUND 21MM

IMPA 613019 PCE

Tool steel round punch, 21mm diameter, forged and polished.

PUNCH HOLE ROUND 22MM

PUNCH HOLE ROUND 22MM

IMPA 613020 PCE

Tool steel round punch, 22mm diameter, forged and polished.

PUNCH HOLE ROUND 23MM

PUNCH HOLE ROUND 23MM

IMPA 613021 PCE

Tool steel round punch, 23mm diameter, forged and polished.

PUNCH HOLE ROUND 24MM

PUNCH HOLE ROUND 24MM

IMPA 613022 PCE

Tool steel round punch, 24mm diameter, forged and polished.

PUNCH HOLE ROUND 25MM

PUNCH HOLE ROUND 25MM

IMPA 613023 PCE

Tool steel round punch, 25mm diameter, forged and polished.

PUNCH HOLE ROUND 26MM

PUNCH HOLE ROUND 26MM

IMPA 613024 PCE

Tool steel round punch, 26mm diameter, forged and polished.

Back to 61. Hand Tools →

Order Punches / Stencils for your vessel

Join our global network as a supplier or start ordering maritime services today

Register as a Supplier

No account needed — tell us the port and we’ll source it for your vessel.

Captain Geo

Captain Geo

AI assistant — answers may contain mistakes

Captain Geo
Hi, I'm Captain Geo ⚓ — your Geomarine intelligence guide. Ask me about plans, registration, or how it works.
Captain Geo