IMPA 59 Deck Scalers

Flexible Shafts and Spare Parts for ICOFLEX Chipping Hammer

"Flexible Shafts and Spare Parts for ICOFLEX Chipping Hammer" items from the IMPA marine catalogue with IMPA codes and units of measure — order for your vessel from verified suppliers via Geomarine.

Supply these items

No account needed — tell us the port and we’ll source it for your vessel.

Items

29 items

FLEXIBLE SHAFT 2220-ZN ICOFEX, CHIPPING HAMMER W/STEEL SHEATH

IMPA 591921 PCE

Flexible shaft with galvanised steel sheath and 5/8" tool connection, standard length 2.5 metres; alternative lengths and connections available on request.

FLEXIBLE SHAFT 2220-SG ICOFEX, CHIPPING HAMMER RUBBER SHEATH

IMPA 591922 PCE

Flexible shaft with rubber-coated sheath and 5/8" tool connection, standard length 2.5 metres; alternative lengths and connections available on request.

HANDLE SPINDLE FOR FLEX SHAFT, ICO 2220-3

IMPA 591923 PCE

Replacement spindle handle assembly for ICO 2220-3 flexible shaft chipping hammer systems.

HANDLE FOR FLEXIBLE SHAFT, ICO 2220MN

IMPA 591924 PCE

Replacement handle assembly for ICO 2220MN flexible shaft chipping hammer systems.

6 HAMMER HEAD #2000-5M FOR, ICO CHIPPING HAMMER

IMPA 591931 PCE

Six-piece hammer head assembly #2000-5M for ICO chipping hammer tools.

9 HAMMER HEAD #2000-2M FOR, ICO CHIPPING HAMMER

IMPA 591932 PCE

Nine-piece hammer head assembly #2000-2M for ICO chipping hammer tools.

12 HAMMER HEAD #2000-1M FOR, ICO CHIPPING HAMMER

IMPA 591933 PCE

Twelve-piece hammer head assembly #2000-1M for ICO chipping hammer tools.

3 CUTTER HEAD #2000-5F FOR, ICO CHIPPING HAMMER

IMPA 591934 PCE

Three-piece cutter head assembly #2000-5F for ICO chipping hammer tools.

6 CUTTER HEAD #2000-4F FOR, ICO CHIPPING HAMMER

IMPA 591935 PCE

Six-piece cutter head assembly #2000-4F for ICO chipping hammer tools.

STEEL HAMMER #2000-19 FOR, ICO CHIPPING HAMMER

IMPA 591936 PCE

Steel hammer component #2000-19 for ICO chipping hammer tools.

3 HOLE FLANGE #2000-23 FOR, ICO CHIPPING HAMMER

IMPA 591937 PCE

Three-hole flange assembly #2000-23 for ICO chipping hammer tools.

6 HOLE FLANGE #2000-28F FOR, ICO CHIPPING HAMMER

IMPA 591938 PCE

Six-hole flange assembly #2000-28F for ICO chipping hammer tools.

STEEL CUTTER #2000-24 FOR, ICO CHIPPING HAMMER

IMPA 591939 PCE

Steel cutter component #2000-24 for ICO chipping hammer tools.

PIVOT FOR HAMMER #2000-26 FOR, ICO CHIPPING HAMMER

IMPA 591940 PCE

Replacement pivot for ICO chipping hammer model #2000-26. Flexible shaft available in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom lengths and connections available on request.

PIVOT FOR CUTTER #2000-22 FOR, ICO CHIPPING HAMMER

IMPA 591941 PCE

Replacement pivot for ICO chipping hammer model #2000-22. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom lengths and connections available on request.

SPINDLE FOR WIRE/CUP BRUSH, #2000-29-C/T F/ICO CHIP HAMMER

IMPA 591942 PCE

Wire/cup brush spindle for ICO chipping hammer model #2000-29-C/T. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom configurations available on request.

SPINDLE FOR 3 CUTTER HEAD, #2000-21 F/ICO CHIPPING HAMMER

IMPA 591943 PCE

Three-cutter head spindle for ICO chipping hammer model #2000-21. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom options available on request.

SPINDLE FOR 9 HAMMER HEAD, #2000-25 F/ICO CHIPPING HAMMER

IMPA 591944 PCE

Nine-hammer head spindle for ICO chipping hammer model #2000-25. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom specifications available on request.

W SPINDLE CENTER PIN F/12 HAMMER, #2000-27 F/ICO CHIPPING HAMMER

IMPA 591945 PCE

Centre pin spindle for 12-hammer configuration, ICO chipping hammer model #2000-27. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom lengths and connections on request.

W WIRE BRUSH TWISTED WIRE, #2000-6/2R F/ICO CHIP HAMMER

IMPA 591946 PCE

Twisted wire brush attachment for ICO chipping hammer model #2000-6/2R. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom configurations available on request.

W WIRE BRUSH SINGLE WIRE, #2000-6/2S F/ICO CHIP HAMMER

IMPA 591947 PCE

Single wire brush attachment for ICO chipping hammer model #2000-6/2S. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom options available on request.

WIRE CUP BRUSH TWISTED WIRE, #2000-7R F/ICO CHIPPING HAMMER

IMPA 591948 PCE

Twisted wire cup brush for ICO chipping hammer model #2000-7R. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom specifications available on request.

WIRE CUP BRUSH SINGLE WIRE, #2000-7S F/ICO CHIPPING HAMMER

IMPA 591949 PCE

Single wire cup brush for ICO chipping hammer model #2000-7S. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom configurations available on request.

WIRE WHEEL BRUSH TWISTED WIRE, #2000-6R F/ICO CHIPPING HAMMER

IMPA 591950 PCE

Twisted wire wheel brush for ICO chipping hammer model #2000-6R. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom options available on request.

WIRE WHEEL BRUSH SINGLE WIRE, #2000-6S F/ICO CHIPPING HAMMER

IMPA 591951 PCE

Single wire wheel brush for ICO chipping hammer model #2000-6S. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom specifications available on request.

EMERY WHEEL #200-9, FOR ICO CHIPPING HAMMER

IMPA 591952 PCE

Emery wheel attachment for ICO chipping hammer model #200-9. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom lengths and connections on request.

CHUCK #2000-8 FOR ICO CHIPPING, HAMMER

IMPA 591953 PCE

Chuck assembly for ICO chipping hammer model #2000-8. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom configurations available on request.

SAFETY GUARD #2000-11, FOR ICO CHIPPING HAMMER

IMPA 591954 PCE

Safety guard for ICO chipping hammer model #2000-11. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom options available on request.

CIRCULAR SAW #2000-10, FOR ICO CHIPPING HAMMER

IMPA 591955 PCE

Circular saw blade attachment for ICO chipping hammer model #2000-10. Flexible shaft in galvanised steel or rubber-coated sheath; 2.5 mtr standard length with 5/8" W tool connection. Custom specifications available on request.

Other families in Deck Scalers

Accessories for ICO Rust Removal Machines 23 Accessories for Rust Removal and Surface Cleaning Machine 7 Accessories for Scaling Machine (59 12 81) 20 Chipping Hammers ICOFLEX 2 Deck Scalers 17 Electric Multipurpose Surface Machines 7 Explosion-proof Deck Scalers Rustibus EX Series 14 Flexible Shafts and Tubes for Scaling Machines 2 Large Area Deck De-scalers 17 Power Edgers Electric 2 Rust Removal Machines 8 Rust Removal and Surface Cleaning Machines Mammut III 4

Back to 59. Pneumatic & Electrical Tools →

Flexible Shafts and Spare Parts for ICOFLEX Chipping Hammer

Items

Other families in Deck Scalers

Get a Quote