IMPA 81 81. Packing & Jointing

Gaskets / Joint Sheets

Browse the product families and items within the "Gaskets / Joint Sheets" sub-group of the IMPA marine catalogue, and order them from verified suppliers via Geomarine.

Families

822

Items

Product families

Bi-directional PTFE Sheet Gasket 6 Butterworth Hole Gaskets 1 Clutch Facings 1 Compressed Non-Asbestos Fiber Sheet 18 Expanded Graphite Joint Sheet Gaskets 12 Felt Packing Sheets 18 Flange Gaskets 207 High Performance Non-Asbestos Sheet - Valqua No.GF-300 3 Joint Sheets All Purpose Non-asbestos 1 Joint Sheets Canvas Insertion Rubber 6 Joint Sheets Cortex 4 Joint Sheets Cotton Insertion Rubber 3 Joint Sheets Fiber 7 Joint Sheets Gasket Non-asbestos Graphite 6 Joint Sheets Gaskets (Common Used) 12 Joint Sheets Metal Foil Inserted Graphite #6633 6 Joint Sheets Natural Rubber 12 Joint Sheets Synthetic Rubber 12 Joint Sheets Vegetable Fiber Oil-proof 8 Joint Sheets gasket Non-asbestos Chemical 1 Joint Sheets gasket Non-asbestos Compressed Air 1 Joint Sheets gasket Non-asbestos Exhaust Gas 1 Joint Sheets gasket Non-asbestos Feed/Boiler Water 1 Joint Sheets gasket Non-asbestos Fresh/Condensate Water 1 Joint Sheets gasket Non-asbestos Fuel/Cargo Oil 1 Joint Sheets gasket Non-asbestos Steam 1 Jointing Sheets Aramid Fiber Hybrid Rubber Pillar #5003 4 Jointing Sheets Beldam Universal Non-asbestos #172 6 Jointing Sheets Expanded Graphite Novaphit SSTC 4 Jointing Sheets General Service Non-asbestos #178 6 Leather Sheets 8 Low Creep PTFE Sheet Gasket Mixed with Selectable Fillers 9 Manhole Packing Non-asbestos 4 Non-asbestos Mica Jointing Sheets Pilotseal Jointing (201) 6 Semi-Metallic Gaskets 1 Spiral Wound Gasket Blacktight Valqua No.6590 Series 4 Spiral Wound Gasket Cleantight Valqua No.8590 Series 4 Spiral Wound Gasket Whitetight Valqua No.7590 Series 3 Spiral Wound Gasket with Lines Lined Cleantight Valqua No.8590L Series 4 Spiral Wound Gaskets 384 Valflon (PTFE) Gasket 12 Valflon Envelope Gasket 3 Valquafoil (Expanded Graphite) Gasket 3 Viton Rubber Sheets 7

Items in this sub-group

822 items

GASKET SPIRAL WOUND TYPE "OR", JIS16/20K 250A W/MORE DETAILS

IMPA 815870 PCE

Spiral wound gasket, JIS16/20K 250A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 288mm, D3: 328mm, D4: 354mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", JIS16/20K 300A W/MORE DETAILS

IMPA 815871 PCE

Spiral wound gasket, JIS16/20K 300A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 339mm, D3: 379mm, D4: 404mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", JIS16/20K 350A W/MORE DETAILS

IMPA 815872 PCE

Spiral wound gasket type OR, JIS16/20K 350A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 376mm, D3: 416mm, D4: 450mm. Specify material on order: Expanded Graphite, Non Asbestos, or PTFE. For pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", JIS16/20K 400A W/MORE DETAILS

IMPA 815873 PCE

Spiral wound gasket type OR, JIS16/20K 400A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 432mm, D3: 482mm, D4: 508mm. Specify material on order: Expanded Graphite, Non Asbestos, or PTFE. For pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", JIS16/20K 450A W/MORE DETAILS

IMPA 815874 PCE

Spiral wound gasket type OR, JIS16/20K 450A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 483mm, D3: 533mm, D4: 573mm. Specify material on order: Expanded Graphite, Non Asbestos, or PTFE. For pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", JIS16/20K 500A W/MORE DETAILS

IMPA 815875 PCE

Spiral wound gasket type OR, JIS16/20K 500A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 533mm, D3: 583mm, D4: 628mm. Specify material on order: Expanded Graphite, Non Asbestos, or PTFE. For pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", JIS16/20K 550A W/MORE DETAILS

IMPA 815876 PCE

Spiral wound gasket type OR, JIS16/20K 550A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 584mm, D3: 634mm, D4: 684mm. Specify material on order: Expanded Graphite, Non Asbestos, or PTFE. For pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", JIS16/20K 600A W/MORE DETAILS

IMPA 815877 PCE

Spiral wound gasket type OR, JIS16/20K 600A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 635mm, D3: 685mm, D4: 734mm. Specify material on order: Expanded Graphite, Non Asbestos, or PTFE. For pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 10A W/MORE DETAILS

IMPA 815881 PCE

Spiral wound OR-type gasket with V-shaped metal strip wound with graphite and inorganic fibres. DIN PN10 10A, dimensions D2: 24mm, D3: 36mm, D4: 46mm. Suitable for pipe flanges, tanks, valve bonnets. Specify material: Expanded Graphite, Non Asbestos, or PTFE.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 15A W/MORE DETAILS

IMPA 815882 PCE

Spiral wound OR-type gasket with V-shaped metal strip wound with graphite and inorganic fibres. DIN PN10 15A, dimensions D2: 30mm, D3: 42mm, D4: 51mm. Suitable for pipe flanges, tanks, valve bonnets. Specify material: Expanded Graphite, Non Asbestos, or PTFE.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 20A W/MORE DETAILS

IMPA 815883 PCE

Spiral wound OR-type gasket with V-shaped metal strip wound with graphite and inorganic fibres. DIN PN10 20A, dimensions D2: 33mm, D3: 47mm, D4: 61mm. Suitable for pipe flanges, tanks, valve bonnets. Specify material: Expanded Graphite, Non Asbestos, or PTFE.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 25A W/MORE DETAILS

IMPA 815884 PCE

Spiral wound OR-type gasket with V-shaped metal strip wound with graphite and inorganic fibres. DIN PN10 25A, dimensions D2: 40mm, D3: 54mm, D4: 71mm. Suitable for pipe flanges, tanks, valve bonnets. Specify material: Expanded Graphite, Non Asbestos, or PTFE.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 32A W/MORE DETAILS

IMPA 815885 PCE

Spiral wound OR-type gasket with V-shaped metal strip wound with graphite and inorganic fibres. DIN PN10 32A, dimensions D2: 50mm, D3: 66mm, D4: 82mm. Suitable for pipe flanges, tanks, valve bonnets. Specify material: Expanded Graphite, Non Asbestos, or PTFE.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 40A W/MORE DETAILS

IMPA 815886 PCE

Spiral wound gasket, DIN PN10 40A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 57mm, D3: 73mm, D4: 92mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 50A W/MORE DETAILS

IMPA 815887 PCE

Spiral wound gasket, DIN PN10 50A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 69mm, D3: 87mm, D4: 107mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 65A W/MORE DETAILS

IMPA 815888 PCE

Spiral wound gasket, DIN PN10 65A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 83mm, D3: 103mm, D4: 127mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 80A W/MORE DETAILS

IMPA 815889 PCE

Spiral wound gasket, DIN PN10 80A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 97mm, D3: 117mm, D4: 142mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 100A W/MORE DETAILS

IMPA 815890 PCE

Spiral wound OR-type gasket with V-shaped metal strip wound with graphite and inorganic fibres. DIN PN10 100A, dimensions D2: 124mm, D3: 144mm, D4: 162mm. Suitable for pipe flanges, tanks, valve bonnets. Specify material: Expanded Graphite, Non Asbestos, or PTFE.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 125A W/MORE DETAILS

IMPA 815891 PCE

Spiral wound OR-type gasket with V-shaped metal strip wound with graphite and inorganic fibres. DIN PN10 125A, dimensions D2: 150mm, D3: 172mm, D4: 192mm. Suitable for pipe flanges, tanks, valve bonnets. Specify material: Expanded Graphite, Non Asbestos, or PTFE.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 150A W/MORE DETAILS

IMPA 815892 PCE

Spiral wound OR-type gasket with V-shaped metal strip wound with graphite and inorganic fibres. DIN PN10 150A, dimensions D2: 178mm, D3: 200mm, D4: 217mm. Suitable for pipe flanges, tanks, valve bonnets. Specify material: Expanded Graphite, Non Asbestos, or PTFE.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 175A W/MORE DETAILS

IMPA 815893 PCE

Spiral wound OR-type gasket with V-shaped metal strip wound with graphite and inorganic fibres. DIN PN10 175A, dimensions D2: 199mm, D3: 225mm, D4: 247mm. Suitable for pipe flanges, tanks, valve bonnets. Specify material: Expanded Graphite, Non Asbestos, or PTFE.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 200A W/MORE DETAILS

IMPA 815894 PCE

Spiral wound OR-type gasket with V-shaped metal strip wound with graphite and inorganic fibres. DIN PN10 200A, dimensions D2: 230mm, D3: 256mm, D4: 272mm. Suitable for pipe flanges, tanks, valve bonnets. Specify material: Expanded Graphite, Non Asbestos, or PTFE.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 250A W/MORE DETAILS

IMPA 815895 PCE

Spiral wound OR-type gasket with V-shaped metal strip wound with graphite and inorganic fibres. DIN PN10 250A, dimensions D2: 279mm, D3: 307mm, D4: 327mm. Suitable for pipe flanges, tanks, valve bonnets. Specify material: Expanded Graphite, Non Asbestos, or PTFE.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 300A W/MORE DETAILS

IMPA 815896 PCE

Spiral wound OR-type gasket with V-shaped metal strip wound with graphite and inorganic fibres. DIN PN10 300A, dimensions D2: 329mm, D3: 357mm, D4: 377mm. Suitable for pipe flanges, tanks, valve bonnets. Specify material: Expanded Graphite, Non Asbestos, or PTFE.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 350A W/MORE DETAILS

IMPA 815897 PCE

Spiral wound OR-type gasket with V-shaped metal strip wound with graphite and inorganic fibres. DIN PN10 350A, dimensions D2: 375mm, D3: 405mm, D4: 437mm. Suitable for pipe flanges, tanks, valve bonnets. Specify material: Expanded Graphite, Non Asbestos, or PTFE.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 400A W/MORE DETAILS

IMPA 815898 PCE

Spiral wound OR-type gasket with V-shaped metal strip wound with graphite and inorganic fibres. DIN PN10 400A, dimensions D2: 426mm, D3: 458mm, D4: 488mm. Suitable for pipe flanges, tanks, valve bonnets. Specify material: Expanded Graphite, Non Asbestos, or PTFE.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 500A W/MORE DETAILS

IMPA 815899 PCE

Spiral wound gasket, DIN PN10 500A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 530mm, D3: 566mm, D4: 593mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN10 600A W/MORE DETAILS

IMPA 815900 PCE

Spiral wound gasket, DIN PN10 600A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 630mm, D3: 666mm, D4: 695mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN16 10A W/MORE DETAILS

IMPA 815901 PCE

Spiral wound gasket, DIN PN16 10A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 24mm, D3: 36mm, D4: 46mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN16 15A W/MORE DETAILS

IMPA 815902 PCE

Spiral wound gasket, DIN PN16 15A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 30mm, D3: 42mm, D4: 51mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN16 20A W/MORE DETAILS

IMPA 815903 PCE

Spiral wound gasket, DIN PN16 20A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 33mm, D3: 47mm, D4: 61mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN16 25A W/MORE DETAILS

IMPA 815904 PCE

Spiral wound gasket, DIN PN16 25A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 40mm, D3: 54mm, D4: 71mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN16 32A W/MORE DETAILS

IMPA 815905 PCE

Spiral wound gasket, DIN PN16 32A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 50mm, D3: 66mm, D4: 82mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN16 40A W/MORE DETAILS

IMPA 815906 PCE

Spiral wound gasket, DIN PN16 40A, V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 57mm, D3: 73mm, D4: 92mm. Specify filler material: Expanded Graphite, Non Asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN16 50A W/MORE DETAILS

IMPA 815907 PCE

Spiral wound gasket, DIN PN16 50A, V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 69mm, D3: 87mm, D4: 107mm. Specify filler material: Expanded Graphite, Non Asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN16 65A W/MORE DETAILS

IMPA 815908 PCE

Spiral wound gasket, DIN PN16 65A, V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 83mm, D3: 103mm, D4: 127mm. Specify filler material: Expanded Graphite, Non Asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN16 80A W/MORE DETAILS

IMPA 815909 PCE

Spiral wound gasket, DIN PN16 80A, V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 97mm, D3: 117mm, D4: 142mm. Specify filler material: Expanded Graphite, Non Asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN16 100A W/MORE DETAILS

IMPA 815910 PCE

Spiral wound gasket, DIN PN16 100A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 124mm, D3: 144mm, D4: 162mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN16 125A W/MORE DETAILS

IMPA 815911 PCE

Spiral wound gasket, DIN PN16 125A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 150mm, D3: 172mm, D4: 192mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

GASKET SPIRAL WOUND TYPE "OR", DIN PN16 150A W/MORE DETAILS

IMPA 815912 PCE

Spiral wound gasket, DIN PN16 150A, constructed from V-shaped metal strip wound with graphite and inorganic fibres. Dimensions D2: 178mm, D3: 200mm, D4: 217mm. Available in expanded graphite, non-asbestos, or PTFE. Suitable for pipe flanges, tanks, and valve bonnets.

Back to 81. Packing & Jointing →

Order Gaskets / Joint Sheets for your vessel

Join our global network as a supplier or start ordering maritime services today

No account needed — tell us the port and we’ll source it for your vessel.