REFRACTORY PLASTIC HIGHALUMINA, PLIBRICO THERVEK RM-ALXAB 25KG

Plastic refractories are firebricks in plastic putty-like form which can be installed by ramming the plastics with a wooden hammer or air rammer into any shapes required. After installation, it is baked with operation temperature of the furnace itself (over 1,000°C) to form the tough walls. Castables are refractory cements which are mixed with the proper amount of water for installation. May be poured into frames or trowelled as is the case with ordinary cement. After installation by whichever method, it hardens to a sufficient strength. From among various types of products, the most common products are listed below. THERVEK RM(Ramming) – Plastic refractories: Clay bonded ramming refractory with superior resistance to thermal spalling (Ramming). Plastic refractories does not require mixing, and can be rammed as they are. Clay bonded plastic refractories offer superior resistance to thermal palling.

No account needed — quotes from verified suppliers, typically within 24 hours.