TAPE PIPE IDENTIFICATION #2149, ISO 14726 VIOLET W50MMX30MTR
Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.
No account needed — quotes from verified suppliers, typically within 24 hours.
Item details
- IMPA-Code
- 332149
- Unit of Measure
- NRL
- Section
- 33. Safety Equipment
- Product Family
- Pipe Identification Tape in accordance with ISO 14726
Geomarine brokers ship supplies to vessels worldwide: send the IMPA codes on your requisition and we source prices from verified chandlers and suppliers at your next port of call — no account required, your vessel identity stays private.
