IMPA 67 Steel Materials

Carbon Tool Steel Rounds

"Carbon Tool Steel Rounds" items from the IMPA marine catalogue with IMPA codes and units of measure — order for your vessel from verified suppliers via Geomarine.

Supply these items

No account needed — tell us the port and we’ll source it for your vessel.

Items

200 items

TOOL STEEL CARBON ROUND SK-3, 32MM 20 FEET

IMPA 671680 LN

SK-3 water-hardened carbon tool steel round bar, 32 mm diameter, 20 feet length. Carbon content 1–1.1%. Suitable for taps, dies, and chisels. Annealed for machinability. Specify alternate lengths upon order.

TOOL STEEL CARBON ROUND SK-3, 34MM 20 FEET

IMPA 671681 LN

SK-3 water-hardened carbon tool steel round bar, 34 mm diameter, 20 feet length. Carbon content 1–1.1%. Suitable for taps, dies, and chisels. Annealed for machinability. Specify alternate lengths upon order.

TOOL STEEL CARBON ROUND SK-3, 36MM 20 FEET

IMPA 671682 LN

SK-3 water-hardened carbon tool steel round bar, 36 mm diameter, 20 feet length. Carbon content 1–1.1%. Suitable for taps, dies, and chisels. Annealed for machinability. Specify alternate lengths upon order.

TOOL STEEL CARBON ROUND SK-3, 38MM 20 FEET

IMPA 671683 LN

SK-3 water-hardened carbon tool steel round bar, 38 mm diameter, 20 feet length. Carbon content 1–1.1%. Suitable for taps, dies, and chisels. Annealed for machinability. Specify alternate lengths upon order.

TOOL STEEL CARBON ROUND SK-3, 40MM 20 FEET

IMPA 671684 LN

SK-3 water-hardened carbon tool steel round bar, 40 mm diameter, 20 feet length. Carbon content 1–1.1%. Suitable for taps, dies, and chisels. Annealed for machinability. Specify alternate lengths upon order.

TOOL STEEL CARBON ROUND SK-5, 10MM 20 FEET

IMPA 671685 LN

SK-5 water-hardened carbon tool steel round bar, 10 mm diameter, 20 feet length. Carbon content 0.8–0.9%. Suitable for stamping plates and saw blades. Annealed for machinability. Specify alternate lengths upon order.

TOOL STEEL CARBON ROUND SK-5, 11MM 20 FEET

IMPA 671686 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 11 mm diameter, 20 feet length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 12MM 20 FEET

IMPA 671687 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 12 mm diameter, 20 feet length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 13MM 20 FEET

IMPA 671688 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 13 mm diameter, 20 feet length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 14MM 20 FEET

IMPA 671689 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 14 mm diameter, 20 feet length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 15MM 20 FEET

IMPA 671690 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 15 mm diameter, 20 feet length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 16MM 20 FEET

IMPA 671691 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 16 mm diameter, 20 feet length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 17MM 20 FEET

IMPA 671692 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 17 mm diameter, 20 feet length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 18MM 20 FEET

IMPA 671693 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 18 mm diameter, 20 feet length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 19MM 20 FEET

IMPA 671694 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 19 mm diameter, 20 feet length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 20MM 20 FEET

IMPA 671695 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 20 mm diameter, 20 feet length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 21MM 20 FEET

IMPA 671696 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 21 mm diameter, 20 ft length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 22MM 20 FEET

IMPA 671697 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 22 mm diameter, 20 ft length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 23MM 20 FEET

IMPA 671698 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 23 mm diameter, 20 ft length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 24MM 20 FEET

IMPA 671699 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 24 mm diameter, 20 ft length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 25MM 20 FEET

IMPA 671700 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 25 mm diameter, 20 ft length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 26MM 20 FEET

IMPA 671701 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 26 mm diameter, 20 ft length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 27MM 20 FEET

IMPA 671702 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 27 mm diameter, 20 ft length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 28MM 20 FEET

IMPA 671703 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 28 mm diameter, 20 ft length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 30MM 20 FEET

IMPA 671704 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 30 mm diameter, 20 ft length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 32MM 20 FEET

IMPA 671705 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 32 mm diameter, 20 ft length. Suitable for stamping plates, saw blades, and similar applications. Annealed for machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 34MM 20 FEET

IMPA 671706 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 34 mm diameter, 20 feet length. Suitable for stamping plates, saw blades and similar applications. Annealed for improved machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 36MM 20 FEET

IMPA 671707 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 36 mm diameter, 20 feet length. Suitable for stamping plates, saw blades and similar applications. Annealed for improved machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 38MM 20 FEET

IMPA 671708 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 38 mm diameter, 20 feet length. Suitable for stamping plates, saw blades and similar applications. Annealed for improved machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-5, 40MM 20 FEET

IMPA 671709 LN

Water-hardened carbon tool steel SK-5 (0.8–0.9% carbon), 40 mm diameter, 20 feet length. Suitable for stamping plates, saw blades and similar applications. Annealed for improved machinability. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-3, 10MM 6MTR

IMPA 671710 LN

Water-hardened carbon tool steel SK-3 round bar, 10mm diameter, 6 metre length (carbon content 1–1.1%). Suitable for taps, dies, and chisels. Annealed for machinability. Non-standard lengths available upon request.

TOOL STEEL CARBON ROUND SK-3, 11MM 6MTR

IMPA 671711 LN

Water-hardened carbon tool steel SK-3 round bar, 11mm diameter, 6 metre length (carbon content 1–1.1%). Suitable for taps, dies, and chisels. Annealed for machinability. Non-standard lengths available upon request.

TOOL STEEL CARBON ROUND SK-3, 12MM 6MTR

IMPA 671712 LN

Water-hardened carbon tool steel SK-3 round bar, 12mm diameter, 6 metre length (carbon content 1–1.1%). Suitable for taps, dies, and chisels. Annealed for machinability. Non-standard lengths available upon request.

TOOL STEEL CARBON ROUND SK-3, 13MM 6MTR

IMPA 671713 LN

Water-hardened carbon tool steel SK-3 round bar, 13mm diameter, 6 metre length (carbon content 1–1.1%). Suitable for taps, dies, and chisels. Annealed for machinability. Non-standard lengths available upon request.

TOOL STEEL CARBON ROUND SK-3, 14MM 6MTR

IMPA 671714 LN

Water-hardened carbon tool steel SK-3 round bar, 14mm diameter, 6 metre length (carbon content 1–1.1%). Suitable for taps, dies, and chisels. Annealed for machinability. Non-standard lengths available upon request.

TOOL STEEL CARBON ROUND SK-3, 15MM 6MTR

IMPA 671715 LN

SK-3 water-hardened carbon tool steel round bar, 15 mm diameter, 6 metres length. Carbon content 1–1.1%. Annealed for machinability; suitable for taps, dies, and chisels. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-3, 16MM 6MTR

IMPA 671716 LN

SK-3 water-hardened carbon tool steel round bar, 16 mm diameter, 6 metres length. Carbon content 1–1.1%. Annealed for machinability; suitable for taps, dies, and chisels. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-3, 17MM 6MTR

IMPA 671717 LN

SK-3 water-hardened carbon tool steel round bar, 17 mm diameter, 6 metres length. Carbon content 1–1.1%. Annealed for machinability; suitable for taps, dies, and chisels. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-3, 18MM 6MTR

IMPA 671718 LN

SK-3 water-hardened carbon tool steel round bar, 18 mm diameter, 6 metres length. Carbon content 1–1.1%. Annealed for machinability; suitable for taps, dies, and chisels. Non-standard lengths available on request.

TOOL STEEL CARBON ROUND SK-3, 19MM 6MTR

IMPA 671719 LN

SK-3 water-hardened carbon tool steel round bar, 19 mm diameter, 6 metres length. Carbon content 1–1.1%. Annealed for machinability; suitable for taps, dies, and chisels. Non-standard lengths available on request.

Other families in Steel Materials

Barbed Wire 1 Iron Wire 62 Piano Wire Steel 38 Steel Bleaching Plates 6 Steel Channels Hot Rolled 30 Steel Checker Plates Hot Rolled 14 Steel Equal Angles Hot Rolled 81 Steel Flats Hot Rolled 345 Steel Half Rounds Hot Rolled 6 Steel Hexagon Cold Finished 48 Steel Hexagon Hot Rolled 72 Steel I Beams Hot Rolled 42

Back to 67. Metal Sheets, Bars, Etc. →

Carbon Tool Steel Rounds

Items

Other families in Steel Materials

Get a Quote