Your Digital Maritime Supply Platform

IMPA 63 63. Cutting Tools

Tool Bits / Carbide Tips

Browse the product families and items within the "Tool Bits / Carbide Tips" sub-group of the IMPA marine catalogue, and order them from verified suppliers via Geomarine.

28
Families
389
Items

Product families

Cemented Carbide Tips 65 Inserts Cemented Carbide Throw-away 1 Square Tool Bits 13 Tool Bit Material 23 Tool Bits High Speed Steel Tip Welded - Bent Finishing Tool #15 10 Tool Bits High Speed Steel Tip Welded - Bent Tool #14 10 Tool Bits High Speed Steel Tip Welded - Bent Tool #63 12 Tool Bits High Speed Steel Tip Welded - Bore Finishing Tool #42 5 Tool Bits High Speed Steel Tip Welded - Boring Tool #41 5 Tool Bits High Speed Steel Tip Welded - External Threading Tool #51 5 Tool Bits High Speed Steel Tip Welded - Hand Knife Tool #62 12 Tool Bits High Speed Steel Tip Welded - Internal Threading Tool #52 5 Tool Bits High Speed Steel Tip Welded - Knife Tool #13 10 Tool Bits High Speed Steel Tip Welded - Parting Tool #31 5 Tool Bits High Speed Steel Tip Welded - Parting Tool #66 6 Tool Bits High Speed Steel Tip Welded - Pointed Nose #10 5 Tool Bits High Speed Steel Tip Welded - Pointed Nose Straight Tool #60 6 Tool Bits High Speed Steel Tip Welded - Round Nose Boring Tool #40 5 Tool Bits High Speed Steel Tip Welded - Spring Finishing Tool #22 5 Tool Bits High Speed Steel Tip Welded - Spring Finishing Tool #65 5 Tool Bits High Speed Steel Tip Welded - Spring Parting Tool #32 5 Tool Bits High Speed Steel Tip Welded - Spring Threading Tool #53 5 Tool Bits High Speed Steel Tip Welded - Square Nose #64 6 Tool Bits Plate Cutting-off 4 Tool Bits Rectangular Flat 12 Tool Bits Rectangular Plate 5 Tool Bits Round Bar 8 Tools Single Point 131

Items in this sub-group

389 items
TOOL WITH CARBIDE TIP SINGLE, #47-4 RIGHT HAND 25X25X230MM

TOOL WITH CARBIDE TIP SINGLE, #47-4 RIGHT HAND 25X25X230MM

IMPA 632797 PCE

Carbide-tipped cutting tool, Model 47 right-hand, 25×25×230 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #48-1 LEFT HAND 13X13X100MM

TOOL WITH CARBIDE TIP SINGLE, #48-1 LEFT HAND 13X13X100MM

IMPA 632798 PCE

Carbide-tipped cutting tool, Model 48 left-hand, 13×13×100 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #48-2 LEFT HAND 16X16X160MM

TOOL WITH CARBIDE TIP SINGLE, #48-2 LEFT HAND 16X16X160MM

IMPA 632799 PCE

Carbide-tipped cutting tool, Model 48 left-hand, 16×16×160 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #48-3 LEFT HAND 19X19X190MM

TOOL WITH CARBIDE TIP SINGLE, #48-3 LEFT HAND 19X19X190MM

IMPA 632801 PCE

Carbide-tipped cutting tool, Model 48 left-hand, 19×19×190 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #48-4 LEFT HAND 25X25X230MM

TOOL WITH CARBIDE TIP SINGLE, #48-4 LEFT HAND 25X25X230MM

IMPA 632802 PCE

Carbide-tipped cutting tool, Model 48 left-hand, 25×25×230 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #49-1 RIGHT HAND 13X13X100MM

TOOL WITH CARBIDE TIP SINGLE, #49-1 RIGHT HAND 13X13X100MM

IMPA 632803 PCE

Carbide-tipped cutting tool, right hand, model #49-1, 13×13×100 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #49-2 RIGHT HAND 16X16X120MM

TOOL WITH CARBIDE TIP SINGLE, #49-2 RIGHT HAND 16X16X120MM

IMPA 632804 PCE

Carbide-tipped cutting tool, right hand, model #49-2, 16×16×120 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #49-3 RIGHT HAND 19X19X140MM

TOOL WITH CARBIDE TIP SINGLE, #49-3 RIGHT HAND 19X19X140MM

IMPA 632805 PCE

Carbide-tipped cutting tool, right hand, model #49-3, 19×19×140 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #49-4 RIGHT HAND 25X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #49-4 RIGHT HAND 25X25X160MM

IMPA 632806 PCE

Carbide-tipped cutting tool, right hand, model #49-4, 25×25×160 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #50-1 LEFT HAND 13X13X100MM

TOOL WITH CARBIDE TIP SINGLE, #50-1 LEFT HAND 13X13X100MM

IMPA 632807 PCE

Carbide-tipped cutting tool, left hand, model #50-1, 13×13×100 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #50-2 LEFT HAND 16X16X120MM

TOOL WITH CARBIDE TIP SINGLE, #50-2 LEFT HAND 16X16X120MM

IMPA 632808 PCE

Carbide-tipped cutting tool, left hand, model #50-2, 16×16×120 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #50-3 LEFT HAND 19X19X140MM

TOOL WITH CARBIDE TIP SINGLE, #50-3 LEFT HAND 19X19X140MM

IMPA 632809 PCE

Carbide-tipped cutting tool, left hand, model #50-3, 19×19×140 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #50-4 LEFT HAND 25X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #50-4 LEFT HAND 25X25X160MM

IMPA 632810 PCE

Carbide-tipped cutting tool, left hand, model #50-4, 25×25×160 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #51-1 RIGHT HAND 13X13X140MM

TOOL WITH CARBIDE TIP SINGLE, #51-1 RIGHT HAND 13X13X140MM

IMPA 632811 PCE

Carbide-tipped cutting tool, right hand, model #51-1, 13×13×140 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #51-2 RIGHT HAND 16X16X160MM

TOOL WITH CARBIDE TIP SINGLE, #51-2 RIGHT HAND 16X16X160MM

IMPA 632812 PCE

Carbide-tipped cutting tool, right hand, model #51-2, 16×16×160 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #51-3 RIGHT HAND 19X19X190MM

TOOL WITH CARBIDE TIP SINGLE, #51-3 RIGHT HAND 19X19X190MM

IMPA 632813 PCE

Carbide-tipped cutting tool, right hand, model #51-3, 19×19×190 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #51-4 RIGHT HAND 25X25X230MM

TOOL WITH CARBIDE TIP SINGLE, #51-4 RIGHT HAND 25X25X230MM

IMPA 632814 PCE

Carbide-tipped cutting tool, right hand, model #51-4, 25×25×230 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #52-1 LEFT HAND 13X13X140MM

TOOL WITH CARBIDE TIP SINGLE, #52-1 LEFT HAND 13X13X140MM

IMPA 632815 PCE

Carbide-tipped cutting tool, left hand, model #52-1, 13×13×140 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #52-2 LEFT HAND 16X16X160MM

TOOL WITH CARBIDE TIP SINGLE, #52-2 LEFT HAND 16X16X160MM

IMPA 632816 PCE

Carbide-tipped cutting tool, left hand, model #52-2, 16×16×160 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #52-3 LEFT HAND 19X19X190MM

TOOL WITH CARBIDE TIP SINGLE, #52-3 LEFT HAND 19X19X190MM

IMPA 632817 PCE

Carbide-tipped cutting tool, left hand, model #52-3, 19×19×190 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #52-4 LEFT HAND 25X25X230MM

TOOL WITH CARBIDE TIP SINGLE, #52-4 LEFT HAND 25X25X230MM

IMPA 632818 PCE

Carbide-tipped cutting tool, left hand, model #52-4, 25×25×230 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #91-1 RIGHT HAND 19X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #91-1 RIGHT HAND 19X25X160MM

IMPA 632819 PCE

Single carbide-tipped cutting tool, Model 91 Right Hand, 19×25×160 mm, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #91-2 RIGHT HAND 25X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #91-2 RIGHT HAND 25X25X160MM

IMPA 632820 PCE

Single carbide-tipped cutting tool, Model 91 Right Hand, 25×25×160 mm, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #91-3 RIGHT HAND 25X32X160MM

TOOL WITH CARBIDE TIP SINGLE, #91-3 RIGHT HAND 25X32X160MM

IMPA 632821 PCE

Single carbide-tipped cutting tool, Model 91 Right Hand, 25×32×160 mm, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #92-1 LEFT HAND 19X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #92-1 LEFT HAND 19X25X160MM

IMPA 632822 PCE

Single carbide-tipped cutting tool, Model 92 Left Hand, 19×25×160 mm, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #92-2 LEFT HAND 25X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #92-2 LEFT HAND 25X25X160MM

IMPA 632823 PCE

Single carbide-tipped cutting tool, Model 92 Left Hand, 25×25×160 mm, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #92-3 LEFT HAND 25X32X160MM

TOOL WITH CARBIDE TIP SINGLE, #92-3 LEFT HAND 25X32X160MM

IMPA 632824 PCE

Single carbide-tipped cutting tool, Model 92 Left Hand, 25×32×160 mm, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #93-1 RIGHT 25X38X150MM 50DEG

TOOL WITH CARBIDE TIP SINGLE, #93-1 RIGHT 25X38X150MM 50DEG

IMPA 632825 PCE

Single carbide-tipped cutting tool, Model 93 Right Hand, 25×38×150 mm, 50° angle, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #93-2 RIGHT 25X38X150MM 58DEG

TOOL WITH CARBIDE TIP SINGLE, #93-2 RIGHT 25X38X150MM 58DEG

IMPA 632826 PCE

Single carbide-tipped cutting tool, Model 93 Right Hand, 25×38×150 mm, 58° angle, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #93-3 RIGHT 34X47X150MM 50DEG

TOOL WITH CARBIDE TIP SINGLE, #93-3 RIGHT 34X47X150MM 50DEG

IMPA 632827 PCE

Single carbide-tipped cutting tool, Model 93 Right Hand, 34×47×150 mm, 50° angle, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #93-4 RIGHT 34X47X150MM 58DEG

TOOL WITH CARBIDE TIP SINGLE, #93-4 RIGHT 34X47X150MM 58DEG

IMPA 632828 PCE

Single carbide-tipped cutting tool, Model 93 Right Hand, 34×47×150 mm, 58° angle, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #94-1 LEFT 25X38X150MM 50DEG

TOOL WITH CARBIDE TIP SINGLE, #94-1 LEFT 25X38X150MM 50DEG

IMPA 632829 PCE

Single carbide-tipped cutting tool, Model 94 Left Hand, 25×38×150 mm, 50° angle, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #94-2 LEFT 25X38X150MM 58DEG

TOOL WITH CARBIDE TIP SINGLE, #94-2 LEFT 25X38X150MM 58DEG

IMPA 632830 PCE

Single carbide-tipped cutting tool, Model 94 Left Hand, 25×38×150 mm, 58° angle, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #94-3 LEFT 34X47X150MM 50DEG

TOOL WITH CARBIDE TIP SINGLE, #94-3 LEFT 34X47X150MM 50DEG

IMPA 632831 PCE

Single carbide-tipped cutting tool, Model 94 Left Hand, 34×47×150 mm, 50° angle, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #94-4 LEFT 34X47X150MM 58DEG

TOOL WITH CARBIDE TIP SINGLE, #94-4 LEFT 34X47X150MM 58DEG

IMPA 632832 PCE

Single carbide-tipped cutting tool, Model 94 Left Hand, 34×47×150 mm, 58° angle, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #95-1 STRAIGHT 25X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #95-1 STRAIGHT 25X25X160MM

IMPA 632833 PCE

Single carbide-tipped cutting tool, Model 95 Straight, 25×25×160 mm, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

CARBIDE TIP #01-0 10X6X3MMXR4

CARBIDE TIP #01-0 10X6X3MMXR4

IMPA 632901 PCE

Carbide cutting insert #01-0, 10×6×3 mm with R4 radius. Cement-bonded tip for turning operations.

CARBIDE TIP #01-1 13X9X3MMXR5

CARBIDE TIP #01-1 13X9X3MMXR5

IMPA 632902 PCE

Carbide cutting insert #01-1, 13×9×3 mm with R5 radius. Cement-bonded tip for turning operations.

CARBIDE TIP #01-2 16X11X4MMXR5

CARBIDE TIP #01-2 16X11X4MMXR5

IMPA 632903 PCE

Carbide cutting insert #01-2, 16×11×4 mm with R5 radius. Cement-bonded tip for turning operations.

CARBIDE TIP #01-3 19X13X5MMXR5

CARBIDE TIP #01-3 19X13X5MMXR5

IMPA 632904 PCE

Carbide cutting insert #01-3, 19×13×5 mm with R5 radius. Cement-bonded tip for turning operations.

Back to 63. Cutting Tools →

Order Tool Bits / Carbide Tips for your vessel

Join our global network as a supplier or start ordering maritime services today

Register as a Supplier

No account needed — tell us the port and we’ll source it for your vessel.

Captain Geo

Captain Geo

AI assistant — answers may contain mistakes

Captain Geo
Hi, I'm Captain Geo ⚓ — your Geomarine intelligence guide. Ask me about plans, registration, or how it works.
Captain Geo