Your Digital Maritime Supply Platform

IMPA 63 63. Cutting Tools

Tool Bits / Carbide Tips

Browse the product families and items within the "Tool Bits / Carbide Tips" sub-group of the IMPA marine catalogue, and order them from verified suppliers via Geomarine.

28
Families
389
Items

Product families

Cemented Carbide Tips 65 Inserts Cemented Carbide Throw-away 1 Square Tool Bits 13 Tool Bit Material 23 Tool Bits High Speed Steel Tip Welded - Bent Finishing Tool #15 10 Tool Bits High Speed Steel Tip Welded - Bent Tool #14 10 Tool Bits High Speed Steel Tip Welded - Bent Tool #63 12 Tool Bits High Speed Steel Tip Welded - Bore Finishing Tool #42 5 Tool Bits High Speed Steel Tip Welded - Boring Tool #41 5 Tool Bits High Speed Steel Tip Welded - External Threading Tool #51 5 Tool Bits High Speed Steel Tip Welded - Hand Knife Tool #62 12 Tool Bits High Speed Steel Tip Welded - Internal Threading Tool #52 5 Tool Bits High Speed Steel Tip Welded - Knife Tool #13 10 Tool Bits High Speed Steel Tip Welded - Parting Tool #31 5 Tool Bits High Speed Steel Tip Welded - Parting Tool #66 6 Tool Bits High Speed Steel Tip Welded - Pointed Nose #10 5 Tool Bits High Speed Steel Tip Welded - Pointed Nose Straight Tool #60 6 Tool Bits High Speed Steel Tip Welded - Round Nose Boring Tool #40 5 Tool Bits High Speed Steel Tip Welded - Spring Finishing Tool #22 5 Tool Bits High Speed Steel Tip Welded - Spring Finishing Tool #65 5 Tool Bits High Speed Steel Tip Welded - Spring Parting Tool #32 5 Tool Bits High Speed Steel Tip Welded - Spring Threading Tool #53 5 Tool Bits High Speed Steel Tip Welded - Square Nose #64 6 Tool Bits Plate Cutting-off 4 Tool Bits Rectangular Flat 12 Tool Bits Rectangular Plate 5 Tool Bits Round Bar 8 Tools Single Point 131

Items in this sub-group

389 items
TOOL WITH CARBIDE TIP SINGLE, #33-3 RIGHT HAND 19X19X140MM

TOOL WITH CARBIDE TIP SINGLE, #33-3 RIGHT HAND 19X19X140MM

IMPA 632716 PCE

Carbide-tipped cutting tool, Model 33 Right Hand, 19×19×140mm, for use with square shank holders. Pre-ground tip supplied with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #33-4 RIGHT HAND 25X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #33-4 RIGHT HAND 25X25X160MM

IMPA 632717 PCE

Carbide-tipped cutting tool, Model 33 Right Hand, 25×25×160mm, for use with square shank holders. Pre-ground tip supplied with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #33-5 RIGHT HAND 25X30X180MM

TOOL WITH CARBIDE TIP SINGLE, #33-5 RIGHT HAND 25X30X180MM

IMPA 632718 PCE

Carbide-tipped cutting tool, Model 33 Right Hand, 25×30×180mm, for use with square shank holders. Pre-ground tip supplied with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #33-6 RIGHT HAND 30X35X200MM

TOOL WITH CARBIDE TIP SINGLE, #33-6 RIGHT HAND 30X35X200MM

IMPA 632719 PCE

Carbide-tipped cutting tool, Model 33 Right Hand, 30×35×200mm, for use with square shank holders. Pre-ground tip supplied with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #34-0 LEFT HAND 10X10X80MM

TOOL WITH CARBIDE TIP SINGLE, #34-0 LEFT HAND 10X10X80MM

IMPA 632720 PCE

Carbide-tipped cutting tool, Model 34 Left Hand, 10×10×80mm, for use with square shank holders. Pre-ground tip supplied with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #34-1 LEFT HAND 13X13X100MM

TOOL WITH CARBIDE TIP SINGLE, #34-1 LEFT HAND 13X13X100MM

IMPA 632721 PCE

Carbide-tipped cutting tool, Model 34 Left Hand, 13×13×100mm, for use with square shank holders. Pre-ground tip supplied with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #34-2 LEFT HAND 16X16X120MM

TOOL WITH CARBIDE TIP SINGLE, #34-2 LEFT HAND 16X16X120MM

IMPA 632722 PCE

Carbide-tipped cutting tool, Model 34 Left Hand, 16×16×120mm, for use with square shank holders. Pre-ground tip supplied with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #34-3 LEFT HAND 19X19X140MM

TOOL WITH CARBIDE TIP SINGLE, #34-3 LEFT HAND 19X19X140MM

IMPA 632723 PCE

Carbide-tipped cutting tool, Model 34 Left Hand, 19×19×140mm, for use with square shank holders. Pre-ground tip supplied with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #34-4 LEFT HAND 25X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #34-4 LEFT HAND 25X25X160MM

IMPA 632724 PCE

Carbide-tipped cutting tool, Model 34 Left Hand, 25×25×160mm, for use with square shank holders. Pre-ground tip supplied with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #34-5 LEFT HAND 25X30X180MM

TOOL WITH CARBIDE TIP SINGLE, #34-5 LEFT HAND 25X30X180MM

IMPA 632725 PCE

Carbide-tipped cutting tool, Model 34 Left Hand, 25×30×180mm, for use with square shank holders. Pre-ground tip supplied with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #34-6 LEFT HAND 30X35X200MM

TOOL WITH CARBIDE TIP SINGLE, #34-6 LEFT HAND 30X35X200MM

IMPA 632726 PCE

Carbide-tipped cutting tool, Model 34 Left Hand, 30×35×200mm, for use with square shank holders. Pre-ground tip supplied with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #35-0 STRAIGHT 10X10X80MM

TOOL WITH CARBIDE TIP SINGLE, #35-0 STRAIGHT 10X10X80MM

IMPA 632727 PCE

Straight carbide-tipped cutting tool model 35, 10×10×80 mm, compatible with square shank holders. Specify left or right hand orientation when ordering.

TOOL WITH CARBIDE TIP SINGLE, #35-1 STRAIGHT 13X13X100MM

TOOL WITH CARBIDE TIP SINGLE, #35-1 STRAIGHT 13X13X100MM

IMPA 632728 PCE

Straight carbide-tipped cutting tool model 35, 13×13×100 mm, compatible with square shank holders. Specify left or right hand orientation when ordering.

TOOL WITH CARBIDE TIP SINGLE, #35-2 STRAIGHT 16X16X120MM

TOOL WITH CARBIDE TIP SINGLE, #35-2 STRAIGHT 16X16X120MM

IMPA 632729 PCE

Straight carbide-tipped cutting tool model 35, 16×16×120 mm, compatible with square shank holders. Specify left or right hand orientation when ordering.

TOOL WITH CARBIDE TIP SINGLE, #35-3 STRAIGHT 19X19X140MM

TOOL WITH CARBIDE TIP SINGLE, #35-3 STRAIGHT 19X19X140MM

IMPA 632730 PCE

Straight carbide-tipped cutting tool model 35, 19×19×140 mm, compatible with square shank holders. Specify left or right hand orientation when ordering.

TOOL WITH CARBIDE TIP SINGLE, #35-4 STRAIGHT 25X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #35-4 STRAIGHT 25X25X160MM

IMPA 632731 PCE

Straight carbide-tipped cutting tool model 35, 25×25×160 mm, compatible with square shank holders. Specify left or right hand orientation when ordering.

TOOL WITH CARBIDE TIP SINGLE, #35-5 STRAIGHT 25X30X180MM

TOOL WITH CARBIDE TIP SINGLE, #35-5 STRAIGHT 25X30X180MM

IMPA 632732 PCE

Straight carbide-tipped cutting tool model 35, 25×30×180 mm, compatible with square shank holders. Specify left or right hand orientation when ordering.

TOOL WITH CARBIDE TIP SINGLE, #35-6 STRAIGHT 30X35X200MM

TOOL WITH CARBIDE TIP SINGLE, #35-6 STRAIGHT 30X35X200MM

IMPA 632733 PCE

Straight carbide-tipped cutting tool model 35, 30×35×200 mm, compatible with square shank holders. Specify left or right hand orientation when ordering.

TOOL WITH CARBIDE TIP SINGLE, #36-0 STRAIGHT 10X10X80MM

TOOL WITH CARBIDE TIP SINGLE, #36-0 STRAIGHT 10X10X80MM

IMPA 632734 PCE

Straight carbide-tipped cutting tool model 36, 10×10×80 mm, compatible with square shank holders. Specify left or right hand orientation when ordering.

TOOL WITH CARBIDE TIP SINGLE, #36-1 STRAIGHT 13X13X100MM

TOOL WITH CARBIDE TIP SINGLE, #36-1 STRAIGHT 13X13X100MM

IMPA 632735 PCE

Straight carbide-tipped cutting tool model 36, 13×13×100 mm, compatible with square shank holders. Specify left or right hand orientation when ordering.

TOOL WITH CARBIDE TIP SINGLE, #36-2 STRAIGHT 16X16X120MM

TOOL WITH CARBIDE TIP SINGLE, #36-2 STRAIGHT 16X16X120MM

IMPA 632736 PCE

Straight carbide-tipped cutting tool model 36, 16×16×120 mm, compatible with square shank holders. Specify left or right hand orientation when ordering.

TOOL WITH CARBIDE TIP SINGLE, #36-3 STRAIGHT 19X19X140MM

TOOL WITH CARBIDE TIP SINGLE, #36-3 STRAIGHT 19X19X140MM

IMPA 632737 PCE

Straight carbide-tipped cutting tool model 36, 19×19×140 mm, compatible with square shank holders. Specify left or right hand orientation when ordering.

TOOL WITH CARBIDE TIP SINGLE, #36-4 STRAIGHT 25X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #36-4 STRAIGHT 25X25X160MM

IMPA 632738 PCE

Straight carbide-tipped cutting tool model 36, 25×25×160 mm, compatible with square shank holders. Specify left or right hand orientation when ordering.

TOOL WITH CARBIDE TIP SINGLE, #36-5 STRAIGHT 25X30X180MM

TOOL WITH CARBIDE TIP SINGLE, #36-5 STRAIGHT 25X30X180MM

IMPA 632739 PCE

Straight carbide-tipped cutting tool model 36, 25×30×180 mm, compatible with square shank holders. Specify left or right hand orientation when ordering.

TOOL WITH CARBIDE TIP SINGLE, #36-6 STRAIGHT 30X35X200MM

TOOL WITH CARBIDE TIP SINGLE, #36-6 STRAIGHT 30X35X200MM

IMPA 632740 PCE

Straight carbide-tipped cutting tool model 36, 30×35×200 mm, compatible with square shank holders. Specify left or right hand orientation when ordering.

TOOL WITH CARBIDE TIP SINGLE, #37-1 RIGHT HAND 13X13X100MM

TOOL WITH CARBIDE TIP SINGLE, #37-1 RIGHT HAND 13X13X100MM

IMPA 632741 PCE

Right-hand carbide-tipped cutting tool model 37, 13×13×100 mm, compatible with square shank holders.

TOOL WITH CARBIDE TIP SINGLE, #37-2 RIGHT HAND 16X16X120MM

TOOL WITH CARBIDE TIP SINGLE, #37-2 RIGHT HAND 16X16X120MM

IMPA 632742 PCE

Right-hand carbide-tipped cutting tool model 37, 16×16×120 mm, compatible with square shank holders.

TOOL WITH CARBIDE TIP SINGLE, #37-3 RIGHT HAND 19X19X140MM

TOOL WITH CARBIDE TIP SINGLE, #37-3 RIGHT HAND 19X19X140MM

IMPA 632743 PCE

Right-hand carbide-tipped cutting tool model 37, 19×19×140 mm, compatible with square shank holders.

TOOL WITH CARBIDE TIP SINGLE, #37-4 RIGHT HAND 25X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #37-4 RIGHT HAND 25X25X160MM

IMPA 632744 PCE

Right-hand carbide-tipped cutting tool model 37, 25×25×160 mm, compatible with square shank holders.

TOOL WITH CARBIDE TIP SINGLE, #37-5 RIGHT HAND 25X30X180MM

TOOL WITH CARBIDE TIP SINGLE, #37-5 RIGHT HAND 25X30X180MM

IMPA 632745 PCE

Right-hand carbide-tipped cutting tool model 37, 25×30×180 mm, compatible with square shank holders.

TOOL WITH CARBIDE TIP SINGLE, #37-6 RIGHT HAND 30X35X200MM

TOOL WITH CARBIDE TIP SINGLE, #37-6 RIGHT HAND 30X35X200MM

IMPA 632746 PCE

Right-hand carbide-tipped cutting tool model 37, 30×35×200 mm, compatible with square shank holders.

TOOL WITH CARBIDE TIP SINGLE, #38-1 LEFT HAND 13X13X100MM

TOOL WITH CARBIDE TIP SINGLE, #38-1 LEFT HAND 13X13X100MM

IMPA 632747 PCE

Model #38-1 left-hand carbide cutting tool, 13×13×100 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #38-2 LEFT HAND 16X16X120MM

TOOL WITH CARBIDE TIP SINGLE, #38-2 LEFT HAND 16X16X120MM

IMPA 632748 PCE

Model #38-2 left-hand carbide cutting tool, 16×16×120 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #38-3 LEFT HAND 19X19X140MM

TOOL WITH CARBIDE TIP SINGLE, #38-3 LEFT HAND 19X19X140MM

IMPA 632749 PCE

Model #38-3 left-hand carbide cutting tool, 19×19×140 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #38-4 LEFT HAND 25X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #38-4 LEFT HAND 25X25X160MM

IMPA 632750 PCE

Model #38-4 left-hand carbide cutting tool, 25×25×160 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #38-5 LEFT HAND 25X30X180MM

TOOL WITH CARBIDE TIP SINGLE, #38-5 LEFT HAND 25X30X180MM

IMPA 632751 PCE

Model #38-5 left-hand carbide cutting tool, 25×30×180 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #38-6 LEFT HAND 30X35X200MM

TOOL WITH CARBIDE TIP SINGLE, #38-6 LEFT HAND 30X35X200MM

IMPA 632752 PCE

Model #38-6 left-hand carbide cutting tool, 30×35×200 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #39-0 RIGHT HAND 10X10X80MM

TOOL WITH CARBIDE TIP SINGLE, #39-0 RIGHT HAND 10X10X80MM

IMPA 632753 PCE

Model #39-0 right-hand carbide cutting tool, 10×10×80 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #39-1 RIGHT HAND 13X13X100MM

TOOL WITH CARBIDE TIP SINGLE, #39-1 RIGHT HAND 13X13X100MM

IMPA 632754 PCE

Model #39-1 right-hand carbide cutting tool, 13×13×100 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #39-2 RIGHT HAND 16X16X120MM

TOOL WITH CARBIDE TIP SINGLE, #39-2 RIGHT HAND 16X16X120MM

IMPA 632755 PCE

Model #39-2 right-hand carbide cutting tool, 16×16×120 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

Back to 63. Cutting Tools →

Order Tool Bits / Carbide Tips for your vessel

Join our global network as a supplier or start ordering maritime services today

Register as a Supplier

No account needed — tell us the port and we’ll source it for your vessel.

Captain Geo

Captain Geo

AI assistant — answers may contain mistakes

Captain Geo
Hi, I'm Captain Geo ⚓ — your Geomarine intelligence guide. Ask me about plans, registration, or how it works.
Captain Geo