Your Digital Maritime Supply Platform

IMPA 63 Tool Bits / Carbide Tips

Tools Single Point

"Tools Single Point " items from the IMPA marine catalogue with IMPA codes and units of measure — order for your vessel from verified suppliers via Geomarine.

Supply these items

No account needed — tell us the port and we’ll source it for your vessel.

Items

131 items
TOOL WITH CARBIDE TIP SINGLE, #43-3 STRAIGHT 16X22X140MM

TOOL WITH CARBIDE TIP SINGLE, #43-3 STRAIGHT 16X22X140MM

IMPA 632781 PCE

Single carbide-tipped cutting tool, Model #43-3, straight profile, 16×22×140 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #43-4 STRAIGHT 19X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #43-4 STRAIGHT 19X25X160MM

IMPA 632782 PCE

Single carbide-tipped cutting tool, Model #43-4, straight profile, 19×25×160 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #43-5 STRAIGHT 22X32X180MM

TOOL WITH CARBIDE TIP SINGLE, #43-5 STRAIGHT 22X32X180MM

IMPA 632783 PCE

Single carbide-tipped cutting tool, Model #43-5, straight profile, 22×32×180 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #43-6 STRAIGHT 25X38X200MM

TOOL WITH CARBIDE TIP SINGLE, #43-6 STRAIGHT 25X38X200MM

IMPA 632784 PCE

Single carbide-tipped cutting tool, Model #43-6, straight profile, 25×38×200 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #45-1 RIGHT HAND 13X13X140MM

TOOL WITH CARBIDE TIP SINGLE, #45-1 RIGHT HAND 13X13X140MM

IMPA 632785 PCE

Single carbide-tipped cutting tool, Model #45-1, right-hand, 13×13×140 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #45-2 RIGHT HAND 16X16X160MM

TOOL WITH CARBIDE TIP SINGLE, #45-2 RIGHT HAND 16X16X160MM

IMPA 632786 PCE

Single carbide-tipped cutting tool, Model #45-2, right-hand, 16×16×160 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #45-3 RIGHT HAND 19X19X190MM

TOOL WITH CARBIDE TIP SINGLE, #45-3 RIGHT HAND 19X19X190MM

IMPA 632787 PCE

Carbide-tipped cutting tool, Model 45 right-hand, 19×19×190 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #45-4 RIGHT HAND 25X25X230MM

TOOL WITH CARBIDE TIP SINGLE, #45-4 RIGHT HAND 25X25X230MM

IMPA 632788 PCE

Carbide-tipped cutting tool, Model 45 right-hand, 25×25×230 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #46-1 LEFT HAND 13X13X140MM

TOOL WITH CARBIDE TIP SINGLE, #46-1 LEFT HAND 13X13X140MM

IMPA 632790 PCE

Carbide-tipped cutting tool, Model 46 left-hand, 13×13×140 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #46-2 LEFT HAND 16X16X160MM

TOOL WITH CARBIDE TIP SINGLE, #46-2 LEFT HAND 16X16X160MM

IMPA 632791 PCE

Carbide-tipped cutting tool, Model 46 left-hand, 16×16×160 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #46-3 LEFT HAND 19X19X190MM

TOOL WITH CARBIDE TIP SINGLE, #46-3 LEFT HAND 19X19X190MM

IMPA 632792 PCE

Carbide-tipped cutting tool, Model 46 left-hand, 19×19×190 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #46-4 LEFT HAND 25X25X230MM

TOOL WITH CARBIDE TIP SINGLE, #46-4 LEFT HAND 25X25X230MM

IMPA 632793 PCE

Carbide-tipped cutting tool, Model 46 left-hand, 25×25×230 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #47-1 RIGHT HAND 13X13X100MM

TOOL WITH CARBIDE TIP SINGLE, #47-1 RIGHT HAND 13X13X100MM

IMPA 632794 PCE

Carbide-tipped cutting tool, Model 47 right-hand, 13×13×100 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #47-2 RIGHT HAND 16X16X160MM

TOOL WITH CARBIDE TIP SINGLE, #47-2 RIGHT HAND 16X16X160MM

IMPA 632795 PCE

Carbide-tipped cutting tool, Model 47 right-hand, 16×16×160 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #47-3 RIGHT HAND 19X19X190MM

TOOL WITH CARBIDE TIP SINGLE, #47-3 RIGHT HAND 19X19X190MM

IMPA 632796 PCE

Carbide-tipped cutting tool, Model 47 right-hand, 19×19×190 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #47-4 RIGHT HAND 25X25X230MM

TOOL WITH CARBIDE TIP SINGLE, #47-4 RIGHT HAND 25X25X230MM

IMPA 632797 PCE

Carbide-tipped cutting tool, Model 47 right-hand, 25×25×230 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #48-1 LEFT HAND 13X13X100MM

TOOL WITH CARBIDE TIP SINGLE, #48-1 LEFT HAND 13X13X100MM

IMPA 632798 PCE

Carbide-tipped cutting tool, Model 48 left-hand, 13×13×100 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #48-2 LEFT HAND 16X16X160MM

TOOL WITH CARBIDE TIP SINGLE, #48-2 LEFT HAND 16X16X160MM

IMPA 632799 PCE

Carbide-tipped cutting tool, Model 48 left-hand, 16×16×160 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #48-3 LEFT HAND 19X19X190MM

TOOL WITH CARBIDE TIP SINGLE, #48-3 LEFT HAND 19X19X190MM

IMPA 632801 PCE

Carbide-tipped cutting tool, Model 48 left-hand, 19×19×190 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #48-4 LEFT HAND 25X25X230MM

TOOL WITH CARBIDE TIP SINGLE, #48-4 LEFT HAND 25X25X230MM

IMPA 632802 PCE

Carbide-tipped cutting tool, Model 48 left-hand, 25×25×230 mm, for square shank holders. Pre-ground tip with removable cellulose protection.

TOOL WITH CARBIDE TIP SINGLE, #49-1 RIGHT HAND 13X13X100MM

TOOL WITH CARBIDE TIP SINGLE, #49-1 RIGHT HAND 13X13X100MM

IMPA 632803 PCE

Carbide-tipped cutting tool, right hand, model #49-1, 13×13×100 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #49-2 RIGHT HAND 16X16X120MM

TOOL WITH CARBIDE TIP SINGLE, #49-2 RIGHT HAND 16X16X120MM

IMPA 632804 PCE

Carbide-tipped cutting tool, right hand, model #49-2, 16×16×120 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #49-3 RIGHT HAND 19X19X140MM

TOOL WITH CARBIDE TIP SINGLE, #49-3 RIGHT HAND 19X19X140MM

IMPA 632805 PCE

Carbide-tipped cutting tool, right hand, model #49-3, 19×19×140 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #49-4 RIGHT HAND 25X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #49-4 RIGHT HAND 25X25X160MM

IMPA 632806 PCE

Carbide-tipped cutting tool, right hand, model #49-4, 25×25×160 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #50-1 LEFT HAND 13X13X100MM

TOOL WITH CARBIDE TIP SINGLE, #50-1 LEFT HAND 13X13X100MM

IMPA 632807 PCE

Carbide-tipped cutting tool, left hand, model #50-1, 13×13×100 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #50-2 LEFT HAND 16X16X120MM

TOOL WITH CARBIDE TIP SINGLE, #50-2 LEFT HAND 16X16X120MM

IMPA 632808 PCE

Carbide-tipped cutting tool, left hand, model #50-2, 16×16×120 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #50-3 LEFT HAND 19X19X140MM

TOOL WITH CARBIDE TIP SINGLE, #50-3 LEFT HAND 19X19X140MM

IMPA 632809 PCE

Carbide-tipped cutting tool, left hand, model #50-3, 19×19×140 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #50-4 LEFT HAND 25X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #50-4 LEFT HAND 25X25X160MM

IMPA 632810 PCE

Carbide-tipped cutting tool, left hand, model #50-4, 25×25×160 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #51-1 RIGHT HAND 13X13X140MM

TOOL WITH CARBIDE TIP SINGLE, #51-1 RIGHT HAND 13X13X140MM

IMPA 632811 PCE

Carbide-tipped cutting tool, right hand, model #51-1, 13×13×140 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #51-2 RIGHT HAND 16X16X160MM

TOOL WITH CARBIDE TIP SINGLE, #51-2 RIGHT HAND 16X16X160MM

IMPA 632812 PCE

Carbide-tipped cutting tool, right hand, model #51-2, 16×16×160 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #51-3 RIGHT HAND 19X19X190MM

TOOL WITH CARBIDE TIP SINGLE, #51-3 RIGHT HAND 19X19X190MM

IMPA 632813 PCE

Carbide-tipped cutting tool, right hand, model #51-3, 19×19×190 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #51-4 RIGHT HAND 25X25X230MM

TOOL WITH CARBIDE TIP SINGLE, #51-4 RIGHT HAND 25X25X230MM

IMPA 632814 PCE

Carbide-tipped cutting tool, right hand, model #51-4, 25×25×230 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #52-1 LEFT HAND 13X13X140MM

TOOL WITH CARBIDE TIP SINGLE, #52-1 LEFT HAND 13X13X140MM

IMPA 632815 PCE

Carbide-tipped cutting tool, left hand, model #52-1, 13×13×140 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #52-2 LEFT HAND 16X16X160MM

TOOL WITH CARBIDE TIP SINGLE, #52-2 LEFT HAND 16X16X160MM

IMPA 632816 PCE

Carbide-tipped cutting tool, left hand, model #52-2, 16×16×160 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #52-3 LEFT HAND 19X19X190MM

TOOL WITH CARBIDE TIP SINGLE, #52-3 LEFT HAND 19X19X190MM

IMPA 632817 PCE

Carbide-tipped cutting tool, left hand, model #52-3, 19×19×190 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #52-4 LEFT HAND 25X25X230MM

TOOL WITH CARBIDE TIP SINGLE, #52-4 LEFT HAND 25X25X230MM

IMPA 632818 PCE

Carbide-tipped cutting tool, left hand, model #52-4, 25×25×230 mm. Pre-ground tip with protective cellulose sheath. Fits square shank tool holders.

TOOL WITH CARBIDE TIP SINGLE, #91-1 RIGHT HAND 19X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #91-1 RIGHT HAND 19X25X160MM

IMPA 632819 PCE

Single carbide-tipped cutting tool, Model 91 Right Hand, 19×25×160 mm, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #91-2 RIGHT HAND 25X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #91-2 RIGHT HAND 25X25X160MM

IMPA 632820 PCE

Single carbide-tipped cutting tool, Model 91 Right Hand, 25×25×160 mm, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #91-3 RIGHT HAND 25X32X160MM

TOOL WITH CARBIDE TIP SINGLE, #91-3 RIGHT HAND 25X32X160MM

IMPA 632821 PCE

Single carbide-tipped cutting tool, Model 91 Right Hand, 25×32×160 mm, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

TOOL WITH CARBIDE TIP SINGLE, #92-1 LEFT HAND 19X25X160MM

TOOL WITH CARBIDE TIP SINGLE, #92-1 LEFT HAND 19X25X160MM

IMPA 632822 PCE

Single carbide-tipped cutting tool, Model 92 Left Hand, 19×25×160 mm, fitted to square shank holders. Pre-ground tip with protective cellulose coating.

Other families in Tool Bits / Carbide Tips

Cemented Carbide Tips 65 Inserts Cemented Carbide Throw-away 1 Square Tool Bits 13 Tool Bit Material 23 Tool Bits High Speed Steel Tip Welded - Bent Finishing Tool #15 10 Tool Bits High Speed Steel Tip Welded - Bent Tool #14 10 Tool Bits High Speed Steel Tip Welded - Bent Tool #63 12 Tool Bits High Speed Steel Tip Welded - Bore Finishing Tool #42 5 Tool Bits High Speed Steel Tip Welded - Boring Tool #41 5 Tool Bits High Speed Steel Tip Welded - External Threading Tool #51 5 Tool Bits High Speed Steel Tip Welded - Hand Knife Tool #62 12 Tool Bits High Speed Steel Tip Welded - Internal Threading Tool #52 5
Back to 63. Cutting Tools →
Captain Geo

Captain Geo

AI assistant — answers may contain mistakes

Captain Geo
Hi, I'm Captain Geo ⚓ — your Geomarine intelligence guide. Ask me about plans, registration, or how it works.
Captain Geo