IMPA 63 Tool Bits / Carbide Tips

Tools Single Point

"Tools Single Point " items from the IMPA marine catalogue with IMPA codes and units of measure — order for your vessel from verified suppliers via Geomarine.

Supply these items

No account needed — tell us the port and we’ll source it for your vessel.

Items

131 items

TOOL WITH CARBIDE TIP SINGLE, #37-1 RIGHT HAND 13X13X100MM

IMPA 632741 PCE

Right-hand carbide-tipped cutting tool model 37, 13×13×100 mm, compatible with square shank holders.

TOOL WITH CARBIDE TIP SINGLE, #37-2 RIGHT HAND 16X16X120MM

IMPA 632742 PCE

Right-hand carbide-tipped cutting tool model 37, 16×16×120 mm, compatible with square shank holders.

TOOL WITH CARBIDE TIP SINGLE, #37-3 RIGHT HAND 19X19X140MM

IMPA 632743 PCE

Right-hand carbide-tipped cutting tool model 37, 19×19×140 mm, compatible with square shank holders.

TOOL WITH CARBIDE TIP SINGLE, #37-4 RIGHT HAND 25X25X160MM

IMPA 632744 PCE

Right-hand carbide-tipped cutting tool model 37, 25×25×160 mm, compatible with square shank holders.

TOOL WITH CARBIDE TIP SINGLE, #37-5 RIGHT HAND 25X30X180MM

IMPA 632745 PCE

Right-hand carbide-tipped cutting tool model 37, 25×30×180 mm, compatible with square shank holders.

TOOL WITH CARBIDE TIP SINGLE, #37-6 RIGHT HAND 30X35X200MM

IMPA 632746 PCE

Right-hand carbide-tipped cutting tool model 37, 30×35×200 mm, compatible with square shank holders.

TOOL WITH CARBIDE TIP SINGLE, #38-1 LEFT HAND 13X13X100MM

IMPA 632747 PCE

Model #38-1 left-hand carbide cutting tool, 13×13×100 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #38-2 LEFT HAND 16X16X120MM

IMPA 632748 PCE

Model #38-2 left-hand carbide cutting tool, 16×16×120 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #38-3 LEFT HAND 19X19X140MM

IMPA 632749 PCE

Model #38-3 left-hand carbide cutting tool, 19×19×140 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #38-4 LEFT HAND 25X25X160MM

IMPA 632750 PCE

Model #38-4 left-hand carbide cutting tool, 25×25×160 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #38-5 LEFT HAND 25X30X180MM

IMPA 632751 PCE

Model #38-5 left-hand carbide cutting tool, 25×30×180 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #38-6 LEFT HAND 30X35X200MM

IMPA 632752 PCE

Model #38-6 left-hand carbide cutting tool, 30×35×200 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #39-0 RIGHT HAND 10X10X80MM

IMPA 632753 PCE

Model #39-0 right-hand carbide cutting tool, 10×10×80 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #39-1 RIGHT HAND 13X13X100MM

IMPA 632754 PCE

Model #39-1 right-hand carbide cutting tool, 13×13×100 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #39-2 RIGHT HAND 16X16X120MM

IMPA 632755 PCE

Model #39-2 right-hand carbide cutting tool, 16×16×120 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #39-3 RIGHT HAND 19X19X140MM

IMPA 632756 PCE

Model #39-3 right-hand carbide cutting tool, 19×19×140 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #39-4 RIGHT HAND 25X25X160MM

IMPA 632757 PCE

Model #39-4 right-hand carbide cutting tool, 25×25×160 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #39-5 RIGHT HAND 25X30X180MM

IMPA 632758 PCE

Model #39-5 right-hand carbide cutting tool, 25×30×180 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #39-6 RIGHT HAND 30X35X200MM

IMPA 632759 PCE

Model #39-6 right-hand carbide cutting tool, 30×35×200 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #40-0 LEFT HAND 10X10X80MM

IMPA 632760 PCE

Model #40-0 left-hand carbide cutting tool, 10×10×80 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #40-1 LEFT HAND 13X13X100MM

IMPA 632761 PCE

Model #40-1 left-hand carbide cutting tool, 13×13×100 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #40-2 LEFT HAND 16X16X120MM

IMPA 632762 PCE

Model #40-2 left-hand carbide cutting tool, 16×16×120 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #40-3 LEFT HAND 19X19X140MM

IMPA 632763 PCE

Model #40-3 left-hand carbide cutting tool, 19×19×140 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #40-4 LEFT HAND 25X25X160MM

IMPA 632764 PCE

Model #40-4 left-hand carbide cutting tool, 25×25×160 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #40-5 LEFT HAND 25X30X180MM

IMPA 632765 PCE

Model #40-5 left-hand carbide cutting tool, 25×30×180 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #40-6 LEFT HAND 30X35X200MM

IMPA 632766 PCE

Model #40-6 left-hand carbide cutting tool, 30×35×200 mm, for square shank holders. Carbide tip is precision-ground and protected by removable cellulose wrapping.

TOOL WITH CARBIDE TIP SINGLE, #41-1 RIGHT HAND 13X13X100MM

IMPA 632767 PCE

Single carbide-tipped cutting tool, Model #41-1, right-hand, 13×13×100 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #41-2 RIGHT HAND 16X16X120MM

IMPA 632768 PCE

Single carbide-tipped cutting tool, Model #41-2, right-hand, 16×16×120 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #41-3 RIGHT HAND 19X19X140MM

IMPA 632769 PCE

Single carbide-tipped cutting tool, Model #41-3, right-hand, 19×19×140 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #41-4 RIGHT HAND 25X25X160MM

IMPA 632770 PCE

Single carbide-tipped cutting tool, Model #41-4, right-hand, 25×25×160 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #41-5 RIGHT HAND 25X30X180MM

IMPA 632771 PCE

Single carbide-tipped cutting tool, Model #41-5, right-hand, 25×30×180 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #41-6 RIGHT HAND 30X35X200MM

IMPA 632772 PCE

Single carbide-tipped cutting tool, Model #41-6, right-hand, 30×35×200 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #42-1 LEFT HAND 13X13X100MM

IMPA 632773 PCE

Single carbide-tipped cutting tool, Model #42-1, left-hand, 13×13×100 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #42-2 LEFT HAND 16X16X120MM

IMPA 632774 PCE

Single carbide-tipped cutting tool, Model #42-2, left-hand, 16×16×120 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #42-3 LEFT HAND 19X19X140MM

IMPA 632775 PCE

Single carbide-tipped cutting tool, Model #42-3, left-hand, 19×19×140 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #42-4 LEFT HAND 25X25X160MM

IMPA 632776 PCE

Single carbide-tipped cutting tool, Model #42-4, left-hand, 25×25×160 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #42-5 LEFT HAND 25X30X180MM

IMPA 632777 PCE

Single carbide-tipped cutting tool, Model #42-5, left-hand, 25×30×180 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #42-6 LEFT HAND 30X35X200MM

IMPA 632778 PCE

Single carbide-tipped cutting tool, Model #42-6, left-hand, 30×35×200 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #43-1 STRAIGHT 10X16X100MM

IMPA 632779 PCE

Single carbide-tipped cutting tool, Model #43-1, straight profile, 10×16×100 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

TOOL WITH CARBIDE TIP SINGLE, #43-2 STRAIGHT 13X19X120MM

IMPA 632780 PCE

Single carbide-tipped cutting tool, Model #43-2, straight profile, 13×19×120 mm, for square shank holders. Pre-ground carbide tip with removable cellulose protective covering.

Other families in Tool Bits / Carbide Tips

Back to 63. Cutting Tools →

Tools Single Point

Items

Other families in Tool Bits / Carbide Tips

Get a Quote