IMPA 63 63. Cutting Tools

Reamers

Browse the product families and items within the "Reamers" sub-group of the IMPA marine catalogue, and order them from verified suppliers via Geomarine.

Families

198

Items

Product families

Reamer Sets Adjustable 8 Reamers Hand 116 Taper Pin Reamers Hand 1/48 18 Taper Pin Reamers Hand 1/50 40 Taper Reamers Morse 16

Items in this sub-group

198 items

REAMER HAND STRAIGHT FLUTE, 21X230MM

IMPA 630641 PCE

Hand-operated reamer with straight flutes, 21×230 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 22X235MM

IMPA 630642 PCE

Hand-operated reamer with straight flutes, 22×235 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 23X250MM

IMPA 630643 PCE

Hand-operated reamer with straight flutes, 23×250 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 24X255MM

IMPA 630644 PCE

Hand-operated reamer with straight flutes, 24×255 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 25X260MM

IMPA 630645 PCE

Hand-operated reamer with straight flutes, 25×260 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 26X270MM

IMPA 630646 PCE

Hand-operated reamer with straight flutes, 26×270 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 28X290MM

IMPA 630647 PCE

Hand-operated reamer with straight flutes, 28×290 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 30X305MM

IMPA 630648 PCE

Hand-operated reamer with straight flutes, 30×305 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 32X315MM

IMPA 630649 PCE

Hand-operated reamer with straight flutes, 32×315 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 34X315MM

IMPA 630650 PCE

Hand-operated reamer with straight flutes, 34×315 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 36X320MM

IMPA 630651 PCE

Hand-operated reamer with straight flutes, 36×320 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 38X325MM

IMPA 630652 PCE

Hand-operated reamer with straight flutes, 38×325 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 40X330MM

IMPA 630653 PCE

Hand-operated reamer with straight flutes, 40×330 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 42X335MM

IMPA 630654 PCE

Hand-operated reamer with straight flutes, 42×335 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 44X340MM

IMPA 630655 PCE

Hand-operated reamer with straight flutes, 44×340 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 46X345MM

IMPA 630656 PCE

Hand-operated reamer with straight flutes, 46×345 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 48X350MM

IMPA 630657 PCE

Hand-operated reamer with straight flutes, 48×350 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND STRAIGHT FLUTE, 50X355MM

IMPA 630658 PCE

Hand-operated reamer with straight flutes, 50×355 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND HELICAL FLUTE, 0.5X30MM

IMPA 630701 PCE

Hand-operated reamer with helical flutes, 0.5×30 mm, for finishing drilled hole surfaces. Chamfered cutting edge for improved engagement.

REAMER HAND HELICAL FLUTE, 0.8X35MM

IMPA 630702 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 0.8 mm, length 35 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 1.0X40MM

IMPA 630703 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 1.0 mm, length 40 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 1.2X45MM

IMPA 630704 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 1.2 mm, length 45 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 1.5X50MM

IMPA 630705 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 1.5 mm, length 50 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 1.8X55MM

IMPA 630706 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 1.8 mm, length 55 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 2.0X60MM

IMPA 630707 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 2.0 mm, length 60 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 2.2X60MM

IMPA 630708 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 2.2 mm, length 60 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 2.5X65MM

IMPA 630709 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 2.5 mm, length 65 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 2.8X65MM

IMPA 630710 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 2.8 mm, length 65 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 3.0X72MM

IMPA 630711 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 3.0 mm, length 72 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 3.5X75MM

IMPA 630712 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 3.5 mm, length 75 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 4.0X80MM

IMPA 630713 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 4.0 mm, length 80 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 4.5X85MM

IMPA 630714 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 4.5 mm, length 85 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 5.0X90MM

IMPA 630715 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 5.0 mm, length 90 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 5.5X95MM

IMPA 630716 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 5.5 mm, length 95 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 6.0X100MM

IMPA 630717 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 6.0 mm, length 100 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 6.5X100MM

IMPA 630718 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 6.5 mm, length 100 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 7.0X105MM

IMPA 630719 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 7.0 mm, length 105 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 7.5X110MM

IMPA 630720 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 7.5 mm, length 110 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 8.0X115MM

IMPA 630721 PCE

Hand-operated reamer with helical flutes for finishing drilled hole surfaces. Diameter 8.0 mm, length 115 mm. Chamfered cutting edge for improved entry.

REAMER HAND HELICAL FLUTE, 8.5X120MM

IMPA 630722 PCE

Hand-operated reamer with helical flutes for finishing pre-drilled holes. Chamfered cutting edge aids entry. Size 8.5×120 mm.

Back to 63. Cutting Tools →

Order Reamers for your vessel

Join our global network as a supplier or start ordering maritime services today

No account needed — tell us the port and we’ll source it for your vessel.