Pneumatic Hand Tools

DRILL ROTARY PNEUMATIC 22MM, HEAVY DUTY

Heavy-duty pneumatic rotary drill, 22 mm capacity, for drilling, reaming, tapping and tube rolling. Side-handled configuration with integral air-hose nipple; operating pressure 0.59 MPa (6 kgf/cm²).

DRILL ROTARY PNEUMATIC 32MM, HEAVY DUTY

Pneumatic rotary drill, 32 mm, heavy duty type with side handle. Performs drilling, reaming, tapping and tube rolling. Includes air hose nipple; requires 0.59 MPa (6 kgf/cm²) air pressure.

DRILL ROTARY PNEUMATIC 50MM, HEAVY DUTY

Pneumatic rotary drill, 50 mm, heavy duty type with side handle. Performs drilling, reaming, tapping and tube rolling. Includes air hose nipple; requires 0.59 MPa (6 kgf/cm²) air pressure.

RUBBER PAD FOR PNEUMATIC, GRINDER WHEEL DIA 58MM

Rubber backing pad for 58mm pneumatic grinder wheel. Dimensions vary by manufacturer; provide grinder make and model when ordering.

RADIAL CHAMFERING TOOL, PNEUMATIC 12000RPM CBR-03

Pneumatic radial chamfering tool, 12,000 rpm (CBR-03) with dual cutting head; for radius chamfering on bridge members and steel tank components. Meets IMO PSPC surface preparation standards prior to coating application.

MULTI TOOLS PNEUMATIC 6.3BAR, GRINDER/DRILL/MILL/BRUSH/SAND

Pneumatic multi-tool set operating at 6.3 bar with grinding, drilling, milling, brush and sanding functions; side-handled rotary unit with air hose nipple supplied.

SCALING HAMMER PNEUMATIC SF3, BERYLLIUM COPPER TRIPLE HEAD

Pneumatic scaling hammer SF3 with triple beryllium copper heads (spark-resistant) for efficient scale and coating removal on open surfaces.

RUBBER PAD FOR PNEUMATIC, GRINDER WHEEL DIA 125MM

Rubber backing pad for 125mm pneumatic grinder wheel. Dimensions vary by manufacturer; provide grinder make and model when ordering.

CHIPPING HAMMER PNEUMATIC, ROUND SHANK

Pneumatic chipping hammer with round shank for billet, general chipping and removal of weld flux, paint and rust in confined spaces. Operating pressure: 0.59 MPa (6 kgf/cm²).

CHIPPING HAMMER PNEUMATIC, HEX SHANK

Pneumatic chipping hammer with hexagonal shank for billet, general chipping and removal of weld flux, paint and rust in confined spaces. Operating pressure: 0.59 MPa (6 kgf/cm²).

SCALING HAMMER PNEUMATIC SF3, SINGLE PIECE STEEL TRIPLE HEAD

Pneumatic scaling hammer SF3 with triple single-piece steel heads for scale and coating removal, designed for production work on accessible areas.

SPARE HEAD F/TRELAWNY SCALING, HAMMER S'GLEPIECE STEEL PISTON

Replacement head assembly with single-piece steel piston for Trelawny pneumatic scaling hammers.

CHISEL FLAT ROUND SHANK, FOR PNEUMATIC CHIPPING HAMMER

Flat chisel with round shank for pneumatic chipping hammers; specify hammer manufacturer and model when ordering.

CHISEL MOIL POINT ROUND SHANK, FOR PNEUMATIC CHIPPING HAMMER

Moil point chisel with round shank for pneumatic chipping hammers; specify hammer manufacturer and model when ordering.

CHISEL FLAT HEX SHANK, FOR PNEUMATIC CHIPPING HAMMER

Flat chisel with hex shank for pneumatic chipping hammers; specify hammer manufacturer and model when ordering.

CHISEL MOIL POINT HEX SHANK, FOR PNEUMATIC CHIPPING HAMMER

Moil point chisel with hex shank for pneumatic chipping hammers; specify hammer manufacturer and model when ordering.

SCALING HAMMER PNEUMATIC, SINGLE

Single-head pneumatic scaling hammer for paint and rust removal; operates at 0.59 MPa (6 kgf/cm²); air hose nipple included; specify manufacturer and model when ordering.

SCALING HAMMER PNEUMATIC, TRIPLE

Triple-head pneumatic scaling hammer for paint and rust removal; operates at 0.59 MPa (6 kgf/cm²); air hose nipple included; specify manufacturer and model when ordering.

SCALING HAMMER PNEUMATIC VLSF1, TUNGSTEN CARBIDE SINGLE HEAD

Pneumatic scaling hammer VLSF1 with single tungsten carbide head for removing scale and coatings from confined and narrow spaces.

SPARE HEAD F/TRELAWNY SCALING, HAMMER TUNGSTEN CARBIDE

Replacement tungsten carbide head for Trelawny pneumatic scaling hammer units.

SPARE HAMMER HEAD, FOR SCALING HAMMER SINGLE

Replacement head for single-head scaling hammer. Specify hammer manufacturer and model when ordering, as heads vary by maker.

SPARE HAMMER HEAD, FOR SCALING HAMMER TRIPLE

Replacement head for triple-head scaling hammer. Specify hammer manufacturer and model when ordering, as heads vary by maker.

SPARE HEAD F/TRELAWNY SCALING, HAMMER BERYLLIUM COPPER

Replacement beryllium copper head (spark-resistant) for Trelawny pneumatic scaling hammer units.

SCALING HAMMER PNEUMATIC, 5 PISTON ICO 819-0

Pneumatic scaling hammer, 5-piston ICO 819-0 type. Piston options: hardened steel, sparkproof bronze or tungsten carbide.

SPARE PISTON FOR SCALINGHAMMER, FOR 5 PISTON ICO 819-2

Replacement piston for Scalinghammer 5 piston ICO 819-2, available in hardened steel, sparkproof bronze or tungsten carbide.

GRINDER ROTARY PNEUMATIC, AIR-SONIC MODEL L-25B

DERUSTING BRUSH AIR MAG9000, HOLGER CLASEN 9000MIN-1

Pneumatic derusting brush MAG9000, 9000 min⁻¹, by Holger Clasen. Features M14 collet chuck, ground conical wheels, and low vibration design for corrosion removal in confined spaces.

BRUSH WIRE CUP CRIMPED 80MMDIA, FOR DERUSTING BRUSH MAG9000

Wire cup brush, crimped, 80 mm diameter, compatible with MAG9000 derusting brush.

BRUSH WIRE CUP PLAITED 80MMDIA, FOR DERUSTING BRUSH MAG9000

Wire cup brush, plaited, 80 mm diameter, compatible with MAG9000 derusting brush.

BRUSH WIRE CUP SS CRIMPED 80MM, FOR DERUSTING BRUSH MAG9000

Stainless steel wire cup brush, crimped, 80 mm diameter, compatible with MAG9000 derusting brush.

BRUSH WIRE CUP PLAITED 60MMDIA, FOR DERUSTING BRUSH MAG9000

Wire cup brush, plaited, 60 mm diameter, compatible with MAG9000 derusting brush.

BRUSH CONICAL WHEEL PLAITED, 100MM F/DERUSTINGBRUSH MAG9000

Conical wheel brush, plaited, 100 mm diameter, compatible with MAG9000 derusting brush.

BRUSH CONICAL WHEEL PLAITED SS, 100MM F/DERUSTINGBRUSH MAG9000

Stainless steel conical wheel brush, plaited, 100 mm diameter, compatible with MAG9000 derusting brush.

PROTECTIVE COVER FOR DERUSTING, BRUSH MAG9000

Protective cover for MAG9000 derusting brush.

BRUSH WIRE CUP CRIMPED 60MMDIA, FOR DERUSTING BRUSH MAG9000

Wire cup brush, crimped, 60 mm diameter, compatible with MAG9000 derusting brush.

BRUSH WIRE CUP SS CRIMPED 60MM, FOR DERUSTING BRUSH MAG9000

Stainless steel wire cup brush, crimped, 60 mm diameter, compatible with MAG9000 derusting brush.

DERUSTING BRUSH AIR GG30/54, HOLGER CLASEN 5400MIN-1

Pneumatic derusting brush GG30/54, 5400 min⁻¹, by Holger Clasen. Features 1.5–6.0 mm collet chuck and compact design for corrosion removal in hard-to-reach areas.

BRUSH WIRE 6MM SHANK 20X0.15MM, F/DERUSTING BRUSH #BP-30305

Wire brush with 6 mm shank, 20×0.15 mm configuration, for GG30/54 derusting brush model BP-30305.

BRUSH WIRE 6MM SHANK 20X0.26MM, F/DERUSTING BRUSH #BP-30302

Wire brush with 6 mm shank, 20×0.26 mm configuration, for GG30/54 derusting brush model BP-30302.

BRUSH WIRE 6MM SHANK 20X0.30MM, F/DERUSTING BRUSH #BP-30304

Wire brush with 6 mm shank, 20×0.30 mm configuration, for GG30/54 derusting brush model BP-30304.